GBC 930-032 operation manual Voyager

Page 13

Operations Manual: Safety

Voyager3

CAUTION HOT SURFACE/ PINCH POINT: Surface may be hot. Do not touch. Keep hands and fingers away from pinch point.

CAUTION PINCH POINT: Keep hands and clothing away from pinch point.

WARNING: Do not operate without all guards in place. You may be seriously injured.

WARNING BLADE HAZARD: Sharp blade, keep hands and fingers away. The sharp blade can crush and cut.

CAUTION HOT SURFACE: Do not touch.

CAUTION HEAVY OBJECT: Exercise safe lifting practices when handling.

WARNING ELECTRICAL SHOCK HAZARD: Live voltage present. Do not touch wires. Use proper lock out/ tag out procedures.

WARNING SHARP EDGE: Keep hands and fingers away. The sharp blade can crush and cut.

WARNING FORK LIFT HERE: For safe moving of the laminator, only place fork lift paddles where indicated on the machine. You may become seriously hurt or cause irreparable damage to the equipment.

2004 General Binding Corporation

Page 1-7

Image 13
Contents Voyager Page Voyager General Binding Corporation III General Binding Corporation Explanation of symbols SafetyGeneral rules of safety Following actions can result in machine damage Jog/Slow Speed w/Guard Open Safety shields Emergency stops E-Stop Heat PneumaticsSafety labels Voyager Sharp Edge Main Power SwitchGBC Films Group Over view Feeder Know your laminatorLaminator Separator Voyager Limited 90-Day Warranty Voyager Specifications Feeder Specifications Feeder Air Pump Specifications Heater Power Requirement Power supplied by the laminatorPre-installation InstallationTo .1.2 connections Water supply drop Installation Receiving the crates Uncrating Laminator Positioning the componentsStacker table Vacuum/ pump ConveyorWater heater/ reservoir tank 1 Component placement Safety Checklist Voyager