Operations Manual: Installation
Voyager3
4.2 Receiving the crates | 4.3 Uncrating |
The GBC Voyager 3 is shipped in two crates. Both crates should arrive at the same time on your docks.
INFORMATION: ALL SHIPMENTS ARE EX- WORKS. At our dock, title passes to the buyer. Please review your insurance cover- age prior to shipment, as you are responsible for all subsequent freight charges and risks.
INFORMATION: Before signing the BILL OF LADING, you should be sure to inspect the crates and/ or pallets for signs of damage or missing items; if applicable, make note of this on the BILL OF LADING.
WARNING: The GBC Voyager 3 Laminator is a large and heavy piece of equipment. It is necessary to employ LICENSED RIGGERS ONLY to move the laminator components.
CAUTION: The GBC Voyager 3 Laminator is not designed to be tipped up side down or sideways in any way. Such action disturbs the exact alignment of the rolling parts of the machine and may require costly and exten- sive realignment.
CAUTION: Do not attempt to remove the sides of the crate by yourself. You can be seriously injured and/ or cause damage to the laminator components.
Below is an example of a typical crated unit. Your crate may have some minor differences but should uncrate in the same manner.
CAUTION: Do not use a knife or other sharp objects to remove shrink wrap or pre mask- ing from around the laminator. You can cause irreparable damage to the rollers.
2004 General Binding Corporation | Page |