Operations Manual: Safety
Voyager
3
CAUTION: Vapor build up or stored flam- mable liquids can cause a fire. Excessive dust can damage the laminator.
CAUTION: Exercise extreme caution when working around or replacing the film cutter blade. This blade is sharp and cut you.
CAUTION: Keep feet away from the feed- er pile table when lowering to ground level.
CAUTION: Avoid contact with the heat roller during webbing, operation,
CAUTION: Always observe all warning labels placed at various points on the laminator. If you do not completely under- stand a label, contact your local service representative for further explanation.
CAUTION: Always follow proper shut- down procedure as described in this manual when turning the laminator off.
CAUTION: Only use materials specified in this manual for cleaning of the lamina- tor and routine maintenance.
CAUTION: The laminator may only be moved by a qualified service representa- tive. Improper disconnection or reconnect- ing can result in injury to you and/ or dam- age to the laminator.
CAUTION: Never use this machine for any other purpose than its intended design and function. You may be injured.
The following actions can result in machine damage.
CAUTION: Do not make any modifications to this laminator. Unauthorized changes will void your war- ranty and may cause extensive repairs or create poor output quality.
CAUTION: Do not locate the laminator where air is blowing directly on the machine. The air flow can cool the rollers unevenly and result in poor output quality.
CAUTION: Only use acceptable materials through this laminator. Unacceptable materials may cause damage to the rollers or cause poor output quality.
CAUTION: Do not place the laminator on uneven surfaces. This will effect the operation of the lamina- tor and will result in poor output quality.
INFORMATION: Any concerns for safety or operation should be brought to the attention of your local service representa- tive immediately.
2004 General Binding Corporation | Page |