GBC 930-032 operation manual Conveyor, Vacuum/ pump, Water heater/ reservoir tank

Page 31

Operations Manual: Installation

Voyager3

Feeder

Once the feeder has been safely removed from the crate, you can move the feeder into position by using a pallet jack or forklift.

To move the feeder, approach the feeder from the front and guide the forks under the feeder where indicated on the cross beams.

Fork Lift

Set the back of the feeder approximately 48 in. (122 cm) from the front of the laminator. This will provide sufficient space for the installation of the conveyor.

Conveyor

The conveyor can be easily carried by two people and set down on the floor between the feeder and the laminator. The belt drive gear end of the con- veyor should be on the feeder end. The conveyor will be connected at the time of installation.

Vacuum/ pump

The vacuum/ pump can moved by placing it on to a pallet jack and moved to the set up location.

Set the vacuum/ pump next to the control panel on the operator side of the laminator. The vacuum/ pump will be connected at the time of installation.

48in.

(122 cm)

INFORMATION: Do not remove the cross beams. They will be removed at the time of installation.

Water heater/ reservoir tank

The water heater and reservoir tank are equipped with castors and can be rolled over flat surfaces and placed next to the laminator.

Set the water heater and reservoir tank next to the electrical box on the drive side of the laminator. The water heater and reservoir tank will be connected at the time of installation.

CAUTION: Tripping Hazard. Position water heater so that hoses from heater do not cause a tripping hazard.

CAUTION: Ensure all accessory items are placed with the GBC Voyager 3. Do not attempt to connect any component after positioning has been completed.

2004 General Binding Corporation

Page 4-7

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Voyager Page Voyager General Binding Corporation III General Binding Corporation Explanation of symbols SafetyGeneral rules of safety Following actions can result in machine damage Jog/Slow Speed w/Guard Open Safety shieldsEmergency stops E-Stop Heat PneumaticsSafety labels Voyager Sharp Edge Main Power SwitchGBC Films Group Over view Feeder Know your laminatorLaminator Separator Voyager Limited 90-Day Warranty Voyager Specifications Feeder Specifications Feeder Air Pump Specifications Heater Power Requirement Power supplied by the laminatorPre-installation InstallationTo .1.2 connections Water supply drop Installation Receiving the crates Uncrating Laminator Positioning the componentsStacker table Vacuum/ pump ConveyorWater heater/ reservoir tank 1 Component placement Safety Checklist Voyager

930-032 specifications

The GBC 930-032 is a cutting-edge device designed for seamless document management and handling, making it an essential tool for offices, schools, and any organization that requires efficient processing of paperwork. This model is part of GBC's impressive lineup of document finishing solutions, which are known for their innovation, reliability, and advanced technology.

One of the standout features of the GBC 930-032 is its advanced laminating capabilities. This device supports various lamination thicknesses, allowing users to choose the level of protection needed for their documents. Whether it's for important reports, marketing materials, or educational resources, the 930-032 ensures that all documents are preserved in perfect condition, resistant to wear, tear, and environmental damage.

The GBC 930-032 employs thermal lamination technology, which provides a glossy, professional finish. It heats lamination films to the perfect temperature, ensuring a strong bond with the document while minimizing the risk of bubbling or wrinkling. This technology is not only effective but also efficient, allowing for quick processing times that keep up with the demands of busy workplaces.

Equipped with user-friendly controls, the GBC 930-032 features an intuitive interface that simplifies the laminating process. Users can easily select settings with just a few clicks, making it accessible to individuals with varying levels of experience. The device also includes automatic shut-off features for energy efficiency, displaying GBC’s commitment to sustainability.

The GBC 930-032 is designed with versatility in mind. Its capability to handle different sizes of documents, from standard A4 to custom sizes, allows organizations to streamline their workflow without needing multiple machines. This flexibility is a valuable asset in environments that produce a wide range of materials.

In terms of build quality, the GBC 930-032 boasts a robust construction that is designed for long-term use. With high-quality components and a reliable motor, users can expect consistent performance over time. This durability reduces maintenance costs and enhances productivity, making the GBC 930-032 a worthwhile investment.

Overall, the GBC 930-032 is an exceptional document finishing solution, delivering efficiency, quality, and versatility in one compact device. Whether for professional presentations, educational charts, or everyday office documents, the GBC 930-032 stands out as a reliable choice for anyone looking to enhance their document management capabilities.
Top Page Image Contents