Printer menus
It is possible, using the front panel buttons, to change the default configuration of the printer to accommodate software application, specific paper size, method of pa- per feed and interface connection. The menu structure consists of three levels:
Category
Each category consists of several items, selected by pressing the MENU 1/Menu 2 button (with the printer
Item
Each item consists of several parameters displayed on the upper line in the LCD by pressing the MENU 1/ Menu 2 button.
Parameter
The parameter will be displayed on the lower line of the LCD by pressing the W/Recover and X/Reset buttons. When the required parameter is displayed, press the ENTER button.
English
Viewing and modifying menu settings
Note: If software can control a feature that is also controlled in the printer menu, the software overrides the menu setting. Use software to control printer features whenever possible.
1.Press ON LINE to place the printer
2.Menu 1 is selected by momentarily pressing and releasing the MENU 1/Menu 2 button. Menu 2 is selected by holding down the MENU 1/Menu 2 button for at least two seconds.
3.Once the first menu category is displayed, further presses of the MENU 1/Menu 2 button move on to the next category.
4.To enter a category and display an item, press the ENTER button. The LCD shows the item in the top line and the current parameter in the bottom line.
User’s Guide | 7 |