Oki 14ex, 14i/n manual 600, 90 sec, 60 sec, Sec, High

English

Level 2 menu settings

Category	Item		Parameter	Explanation
Print Mode	Mode	600	V1200 (600 x 1200)	Printing resolution setting in dots per inch (dpi).
		300
	Autocont	Off	On	The printer can recover from a memory overflow or print overrun automatically after about
				15 seconds if set to ON, otherwise Recover key has to be pressed.
		Off	On	Most computer software will send a form feed character at the end of the print job so that
Auto Operation	Wait Time	5 sec	6 sec	the last page is ejected. If it does not, the printer can automatically eject the last page after a
		90 sec	300 sec	period of inactivity.
	Man Time	60 sec	Off	This setting applies to Adobe PostScript operation only. It determines how long the printer
		30 sec		will wait for a sheet to be inserted in the manual paper feeder.
Darkness				Adjusts internal settings to compensate for variations in humidity. In environments of high
	Darkness	0; +1; +2; -2; -1		temperature and humidity if some feint printing occurs, increase setting. In environments of
Control
				low temperature and humidity if black or white spots appear, decrease setting.
Power Saving	Power	0 sec	8 min	When this function is active, power to the fuser is turned off to conserve energy. A slightly
	Saving	Disable		longer delay will occur before the next job prints, to allow the fuser to warm up again.
Low Toner	Low Tnr	On	Off	This setting determines whether the printer will remain on-line (ON) or go off-line (OFF)
				when the toner cartridge has only enough toner left for about 100 pages.
Toner Saving	Toner	Disable	Medium
		Light
				Many messages which may appear from time to time can be cleared by pressing the Recover
Clearable	Clr Wrng	On	Job	key if this function is ON. If it is set to JOB, the host computer may be able to clear such
Warnings				warnings by downloaded commands. This setting is not relevant when using PostScript
				emulation.
Error Report	Erreport	Off	On	In PostScript mode this setting determines whether an error report will be printed when an
				error has occurred.
	Speed	High	Medium	Most modern PCs can download data at very high speed. If data corruption is experienced
				on printed pages, reduce the setting to MEDIUM.
Parrallel I/F
	Bi-Dirct	Enable	Disable	The printer can send status information back to the computer. A printer interface cable
				compliant with IEEE1284 is needed to use this feature.

User’s Guide 11