Printer maintenance
Maintenance menu
This menu is used for printer maintenance and setting some operating functions. To enter the maintenance menu:
1.Turn off the printer.
2.Press and hold MENU 1/Menu 2 and turn the printer on. USER MNT displays.
3.Press MENU 1/Menu 2 repeatedly to advance to the category required.
4.Press ENTER to start a function. Press X/Reset button to see other options, then press ENTER to select the option required.
5.Press ON LINE to exit.
The following table gives the different functions of the maintenance menu:
Function | Description | |
|
| |
MENU RESET | Reset Level 1 menu to factory settings. | |
|
| |
HEX DUMP | Print a hexadecimal dump of received data for | |
diagnostics. To exit, turn off the printer. | ||
| ||
|
| |
DRUM CNT | Reset the drum counter after replacing the image | |
RESET | drum cartridge. | |
|
|
Function |
|
| Description |
|
|
|
|
| DISABLE | = | Disables all control panel buttons |
OP MENU | except ON LINE. | ||
| ENABLE | = | All buttons are active. |
|
| ||
REC BUFF | Auto, 8KB, 20KB, 50KB, 100KB. (Default = Auto.) | ||
|
| ||
| Adjust horizontal print position in 0.25 mm | ||
X ADJUST | increments. Plus (+) indicates right movement, minus | ||
| |||
|
| ||
| Adjust vertical print position in 0.25 mm increments. | ||
Y ADJUST | Plus (+) indicated downward movement, minus | ||
| indicates upward movement. | ||
|
| ||
2ND TRAY | 1…16. (2nd paper tray address. Default = 5.) | ||
|
|
|
|
Generating a cleaning page
If the printer shows signs of fading, streaking or erratic marks, the problem may be cleared by generating a drum cleaning page as follows.
1.Press the
2.Hold down the W/Recover and X/Reset buttons together for at least two seconds. The LCD shows C L E A N I N G a n d M A N UA L A 4 S I Z E REQUEST.
24 | OKIPAGE 14ex, 14i, 14i/n |