•The power outlet into which the printer is con- nected must remain accessible at all times.
•Opening any cover may expose hot surfaces. These are clearly labelled. Do NOT touch them.
•Do not insert anything into the ventilation slots on the printer; you could get a shock or cause a fire.
•Aside from the routine maintenance described in this user’s guide, do not try to service the printer yourself. Opening a cover may expose you to shocks or other hazards.
•Do not make any adjustments other than those outlined in this users guide as damaged may be caused to the printer.
If anything happens that indicates that the printer is not working properly or has been damaged, disconnect the printer from the power source and contact your dealer. These are some of the things to look for:
•The power cable or plug is frayed or damaged.
•Liquid has been spilled into the printer, or it has been exposed to water.
•The printer has been dropped, or the cabinet is damaged.
•The printer does not function normally when fol- lowing the operating instructions.
Toner cartridge and image drum handling
•Leave unused toner cartridges and image drum units in their packages until needed. When replacing a toner cartridge or image unit, reuse the packaging to dispose of the old toner cartridge or image drum unit.
•Do not expose the toner cartridges and image drum units to light for more than five minutes. Never expose the green drum (inside the image drum unit) to direct sunlight.
•Always hold the image drum unit by the ends - never by the middle. Never touch the green drum inside the image drum unit.
•To avoid damage to the image drum unit, always use original toner cartridges.
•Exercise care when removing the toner cartridge. Do not let it touch your clothing or porous mate- rials. The toner powder causes permanent stains.
2 | OKIPAGE 14ex, 14i, 14i/n |