3.Install the new image drum (1) into the printer placing the alignment pins on each end into the slots in the printer.
4.Remove the sponge packaging from the image drum and discard.
5.Install a new toner cartridge. Refer to “Replacing toner cartridge”.
6.Close the top cover and press down to latch it closed.
7.Reset the drum counter following the instructions given below.
Resetting drum counter
After replacing the image drum, reset the drum counter to keep a correct count of the number of pages printed on the image drum.
1.Turn the printer on while holding the MENU 1/ Menu 2 button. USERMNT displays in the con- trol panel LCD.
2.Press MENU 1/Menu 2 three times. DRUM CNT RESET displays.
3.Press ENTER. The counter resets and the printer goes
20 | OKIPAGE 14ex, 14i, 14i/n |