Chapter 2 Connecting the Cables
2-1 Connecting the AC Adapter to the Printer
Follow these steps to connect the AC adapter to the printer:
➀Make sure the printer is turned off. It is off when the O side of the switch is pressed down.
➁Check the label on the AC adapter to make sure the voltage required by the AC adapter matches that of your electrical outlet.
CAUTIONS:
•To avoid damage to the AC adapter and the printer, or to avoid an incor- rect operation of the printer, do not plug in the power cord, if the rated voltage of the AC adapter and your outlet voltage do not match.
➂Plug the DC cord connector into the printer’s power connector with the arrow mark facing upward. (You can remove the DC cord by grasping the connector firmly at the arrow mark and pulling it straight out.)
Power Connector
Frame Ground Screw
Frame ground cable | AC Adapter |
➃Ground the printer by connecting a frame ground cable (*1) to the printer with the frame ground screw located on the bottom of the printer.
(*1) This cable is not enclosed. Please obtain the appropriate cable for your system.
➄ Plug the AC adapter power cord into the wall outlet.
5