Epson TM-U300PD, TM-U300C, TM-U300D, TM-U300PC Roll Paper Supply Device, Roll Paper Take-up Device

Page 36

Ribbon cassette overall dimensions:

Refer to Figure A-1

[Units: mm]

	Figure A-1. ERC-38 Overall Dimensions
4. Roll Paper Supply Device
Supply method:	Paper roll holding shaft
Near-end detector:	Provided inside the printer case
	The paper near-end detector location should be
	adjusted by the user. Refer to section 3-3, Adjust-
	ing the	Paper Near-End Detector Location.
• Roll paper core
inside diameter:	ø 10.5	to 12.5 mm (0.41" to 0.49")

•Near-end adjustment: Adjustable slider

5.Roll Paper Take-up Device

The TM-U300C and TM-U300PC are equipped with a take-up device. The paper is automatically taken up by the paper feed motor.

6. Paper
Paper feed method:	Friction feed
Paper feed pitch:	Default 1/6 inch
	Can be set in 1/144 inch units by software com-
	mand.
Paper feed speed:	Approx. 4.17 IPS (25 LPS) (continuous feeding)
	(IPS: Inches Per Second)
	(LPS: Lines Per Second)

30

Image 36

Contents TM-U300C/U300D/U300PC/U300PD TM-U300C/U300D TM-U300PC/U300PD Contents of this manual are subject to change without notice FCC Compliance Statement Introduction Contents Checking the Contents of the Printer Box Unpacking the PrinterChoosing a Place for the Printer Removing the Transportation DamperPart Names and Functions Part names➀ Power Switch ➂ Power LED greenFunctions ➁ Feed ButtonConnecting the Cables Connecting the AC Adapter to the PrinterConnecting the Host Computer to the Printer Connecting the host computer to the TM-U300C/U300DConnecting the host computer to the TM-U300PC/U300PD Installing the Ribbon Cassette Lnstalling the ribbon cassettePage Replacing the ribbon cassette Installing the Paper Roll Installing the paper roll in the TM-U300C/U300PCPage Page Installing the paper roll in the TM-U300D/U300PD Page Page Replacing the roll paper for TM-U300C/U300PC Replacing the paper roll in the TM-U300D/U300PD Adjusting the Paper Near-End Detector Location Adjusting the paper near-end detectorPaper near-end detector Page Inserting a Cut Sheet Validation Paper Validation paper Finding the DIP switches Setting the DIP switchesTM-U300C/U300D DIP Switch Functions Baud Rate SelectionTM-U300PC/U300PD DIP Switch Functions Purpose of the self test Running the self testHost computer TM-U300C/U300D Self-test Printing Sample Removing Jammed Paper Removing Jammed PaperAppendix A. Specifications Printing SpecificationsCharacter Specifications Ribbon Roll Paper Supply Device Roll Paper Take-up DevicePaper Number of copies 1Ambient temperature Page Environmental Conditions