Epson TM-U300PC, TM-U300PD, TM-U300D manual Replacing the roll paper for TM-U300C/U300PC

Page 23

■Replacing the roll paper for TM-U300C/U300PC

Be sure to use roll paper that matches the printer’s specifications. See Appendix A, Specifications.

➀Open the take-up device cover.

➁Remove the take-up spool from the printer. (If it is necessary, cut the paper go- ing to the take-up spool, using the tear-off edge.) Then remove the roll paper core.

If there is roll paper remaining, cut the paper straight across using scissors at the place shown in illustration below.

➂While pressing the FEED switch, remove the remaining roll paper in the printer by pulling the paper lightly out in the direction of the arrow.

Cut here if there is paper remaini

➃To install a new paper roll, see Installing the paper roll in the TM-U300C/U300PC, on page 11.

17

Image 23

Contents TM-U300C/U300D/U300PC/U300PD TM-U300C/U300D TM-U300PC/U300PD Contents of this manual are subject to change without notice FCC Compliance Statement Introduction Contents Unpacking the Printer Checking the Contents of the Printer BoxRemoving the Transportation Damper Choosing a Place for the PrinterPart names Part Names and Functions➁ Feed Button ➀ Power Switch➂ Power LED green FunctionsConnecting the AC Adapter to the Printer Connecting the CablesConnecting the host computer to the TM-U300C/U300D Connecting the Host Computer to the PrinterConnecting the host computer to the TM-U300PC/U300PD Lnstalling the ribbon cassette Installing the Ribbon CassettePage Replacing the ribbon cassette Installing the paper roll in the TM-U300C/U300PC Installing the Paper RollPage Page Installing the paper roll in the TM-U300D/U300PD Page Page Replacing the roll paper for TM-U300C/U300PC Replacing the paper roll in the TM-U300D/U300PD Paper near-end detector Adjusting the Paper Near-End Detector LocationAdjusting the paper near-end detector Page Inserting a Cut Sheet Validation Paper Validation paper Setting the DIP switches Finding the DIP switchesBaud Rate Selection TM-U300C/U300D DIP Switch FunctionsTM-U300PC/U300PD DIP Switch Functions Self-test Printing Sample Purpose of the self testRunning the self test Host computer TM-U300C/U300DRemoving Jammed Paper Removing Jammed PaperCharacter Specifications Appendix A. SpecificationsPrinting Specifications Ribbon Paper Roll Paper Supply DeviceRoll Paper Take-up Device Number of copies 1Ambient temperature Page Environmental Conditions