Epson TM-U300D, TM-U300PD, TM-U300C, TM-U300PC manual

Page 26

Referring to the illustration below, set the position detector plate to the appropri- ate position according to the adjustment position number from the table above.

TM-U300C/U300PC

TM-U300D/U300PD

NOTES:

1.Since the adjustment values in the Table 3-1 are calculated value, there may be some variations depending on the printer.

2.If roll paper with a red end mark at the paper end is used, this mark may cause the paper to stick together. If this occurs, the paper near-end detector may operate incorrectly.

3.Be sure that the detecting lever operates smoothly after you finish the adjustment.

4.If the roll paper becomes loose due to the paper quality, the paper near-end detector may operate incorrectly.

20

Image 26
Contents TM-U300C/U300D/U300PC/U300PD TM-U300C/U300D TM-U300PC/U300PD Contents of this manual are subject to change without notice FCC Compliance Statement Introduction Contents Checking the Contents of the Printer Box Unpacking the PrinterChoosing a Place for the Printer Removing the Transportation DamperPart Names and Functions Part namesFunctions ➀ Power Switch➂ Power LED green ➁ Feed ButtonConnecting the Cables Connecting the AC Adapter to the PrinterConnecting the Host Computer to the Printer Connecting the host computer to the TM-U300C/U300DConnecting the host computer to the TM-U300PC/U300PD Installing the Ribbon Cassette Lnstalling the ribbon cassettePage Replacing the ribbon cassette Installing the Paper Roll Installing the paper roll in the TM-U300C/U300PCPage Page Installing the paper roll in the TM-U300D/U300PD Page Page Replacing the roll paper for TM-U300C/U300PC Replacing the paper roll in the TM-U300D/U300PD Paper near-end detector Adjusting the Paper Near-End Detector LocationAdjusting the paper near-end detector Page Inserting a Cut Sheet Validation Paper Validation paper Finding the DIP switches Setting the DIP switchesTM-U300C/U300D DIP Switch Functions Baud Rate SelectionTM-U300PC/U300PD DIP Switch Functions Host computer TM-U300C/U300D Purpose of the self testRunning the self test Self-test Printing SampleRemoving Jammed Paper Removing Jammed PaperCharacter Specifications Appendix A. SpecificationsPrinting Specifications Ribbon Paper Roll Paper Supply DeviceRoll Paper Take-up Device Number of copies 1Ambient temperature Page Environmental Conditions