Epson TM-U300C, TM-U300PD, TM-U300D, TM-U300PC manual Number of copies 1Ambient temperature

Page 37

Paper size:

 

 

 

 

Roll paper

 

 

 

 

Paper width:

 

76 mm ± 0.5 mm (2.99" ± 0.02")

Maximum

diameter:

 

ø 83 mm (3.27")

(when 2-ply or 3-ply

 

 

 

 

paper is used)

 

 

 

ø 60 mm (2.36")

(when 1 -ply paper is

 

 

 

 

used)

Paper core inside diameter:

ø 10.5 to 12.5 mm

(0.41" to 0.49")

Normal

paper

 

 

 

Paper

thickness:

0.06 to 0.085 mm (0.002" to 0.003’)

(single-ply sheet)

 

 

 

Weight:

52.3 g/m2 to 64 g/m2

 

 

 

(45 to 55 kg/1000 sheets/1091 mm x 788 mm)

Pressure sensitive paper Maximum 1 original + 2 copies

Copy capability is greatly influenced by the ambi- ent temperature. Refer to the table below.

1 Number of copies 1Ambient temperature 1

Original + 2 copies Approx. 25°C (77°F)

Original + I copy

5° to 40 °C (41° to 104°F)

 

 

Validation paper

Paper type:

Normal paper, pressure-sensitive paper, carbon

 

copy paper

Paper width and paper length:

Paper thickness:

0.07 mm to 0.14 mm (0.003" to 0.006")

 

(Weight: 56.2 g/m2 to 128 g/m2)

Total thickness including roll paper:

0.2 mm (0.008") or less

31

Image 37
Contents TM-U300C/U300D/U300PC/U300PD TM-U300C/U300D TM-U300PC/U300PD Contents of this manual are subject to change without notice FCC Compliance Statement Introduction Contents Unpacking the Printer Checking the Contents of the Printer BoxRemoving the Transportation Damper Choosing a Place for the PrinterPart names Part Names and Functions➂ Power LED green ➀ Power SwitchFunctions ➁ Feed ButtonConnecting the AC Adapter to the Printer Connecting the CablesConnecting the host computer to the TM-U300C/U300D Connecting the Host Computer to the PrinterConnecting the host computer to the TM-U300PC/U300PD Lnstalling the ribbon cassette Installing the Ribbon CassettePage Replacing the ribbon cassette Installing the paper roll in the TM-U300C/U300PC Installing the Paper RollPage Page Installing the paper roll in the TM-U300D/U300PD Page Page Replacing the roll paper for TM-U300C/U300PC Replacing the paper roll in the TM-U300D/U300PD Adjusting the paper near-end detector Adjusting the Paper Near-End Detector LocationPaper near-end detector Page Inserting a Cut Sheet Validation Paper Validation paper Setting the DIP switches Finding the DIP switchesBaud Rate Selection TM-U300C/U300D DIP Switch FunctionsTM-U300PC/U300PD DIP Switch Functions Running the self test Purpose of the self testHost computer TM-U300C/U300D Self-test Printing SampleRemoving Jammed Paper Removing Jammed Paper Printing Specifications Appendix A. Specifications Character Specifications Ribbon Roll Paper Take-up Device Roll Paper Supply DevicePaper Number of copies 1Ambient temperature Page Environmental Conditions