AMT Datasouth 600 manual Appendix a General Specifications

Appendix A: GENERAL SPECIFICATIONS

Specification	Fastmark 602 PAL			Fastmark 603 PAL
Print method		Direct Thermal	or Thermal Transfer
Resolution		203 dpi		300 dpi
Maximum print width		4 inches
Maximum print length	0.4 to 80 inches			0.4 to 54 inches
Maximum print speed		2 to 6 ips		2 to 5 ips
Onboard Memory		2mb DRAM
		1mb FLASH ROM
CPU type		32 bit RISC microprocessor
Media Information
Type	Roll-Feed, Die-cut Continuous, Fan-fold, tags, ticket, plain
	paper, fabric, wristband
Feed Direction	Wound-In preferred, will accept Wound-Out
Maximum Width	4.3 inches (110 mm)
Minimum Width	0.6 inches (15mm)
Thickness	0.0025 inches to 0.01 inches (0.0635mm to 0.254mm)
Maximum Roll size (OD)	6 inches (152mm)
Minimum Core size (ID)	1 inch (25mm), optional adapter for 3 inch ID core
Media Sensing method	Reflective Sensor
Ribbon Information
Type	Wax, Wax/Resin, Resin
Wind Method	Coating Wound-In
Maximum Width	4.3 inches (110 mm)
Minimum Width	2 inches with Core Adapter
Maximum Roll size (OD)	2.67 inches (68mm)
Core size (ID)	1 inch (25mm)
Core type	Two Slots 180 degree apart
Typical ribbon Length	Resin 300m, Wax 360m
End of Ribbon Method	No motion of Sensor Wheel on Supply ribbon
Label indexing	Gap, Black Bar, Continuous
Interface	RS-232 Serial (9 pin female), Centronic type Parallel, External
	Network Adapter, External USB to Parallel adapter
User Interface	3 buttons (Feed, Pause, Cancel)
	3 LED indicators (Ready, Media, Ribbon)
Dimension	Height:	8.5 inches
	Width:	9.25 inches
	Depth:	12.5 inches
	Weight: 9.3 lbs
Electrical	Auto Voltage Sensing Power Supply
	90 to 250 VAC
Operating temperature	40° F to 100° F
	10 to 90% humidity non condensing
Windows driver	Available for Windows 95/98, XP/2k, NT
Printer emulation	PAL, ASCII, Display, HEX

Fastmark 600 Series User's Guide 81