Accessing the Setup Menu
CONFIGURE
9
To access the setup menu follow these steps:
1.Unplug the printer either at the outlet or at the back of the printer.
2.Press and hold down the left side of the rocker switch and plug in the printer. The printer will advance the paper. After the paper advance has stopped, count for 3 to 5 seconds and then release the switch. The following is printed:
If you wait less than three or more than five seconds Ready is printed and you will have to try steps 1 and 2 again to access the setup menu.
After you access the setup menu, if you press NEXT (left side of switch) repeatedly you will see the following list printed. If you keep pressing NEXT (left side) the list repeats itself.
As you can see from the above printout the setup menu contains the following items:
•CONFIGURE menu
•CUSTOM menu
•SET CLOCK menu
•RESET SEQ#
The following pages explain these items and how to customize the printer to your needs.
The first setup menu item reads:
CONFIGURE [NEXT/OK]
[NEXT/OK] is a visual clue so you know that pressing the left side of the rocker switch will go to the NEXT part of the menu and that pressing the right side of the rocker switch will accept (or say OK to) what this line of the setup menu says.