Set Time and Date Control Code 20
Read Time and Date Control Code 22
Cancel Reverse Field Control Code 24
Reverse Field Control Code 25
2 3
After typing RUN, your custom character will be stored in the printer’s memory. It will retain this information until the printer is switched off or until you write over the data by defining a different character.
To print your newly designed character, simply send CHR$(126) which corresponds to hexidecimal value 7E.
This control code is used when setting the printer’s time and date clock. Following is the text string to send when setting the clock:
This control code is used to read the printer’s time and date clock. Following is the ASCII string received:
Sending this control code will turn off the reverse field mode that is selected using control code 25.
Send this control code to turn on the reverse field printing mode. This will print white letters on a dark background. Do not print more that three reverse field print lines. Also, do not print more than a few empty spaces in a reverse field. The printer may become overloaded and stop printing.