A&D AD-1191 instruction manual

Page 7

This will facilitate the entry of the paper into the printer.

5.Slide the paper through the slot connecting the paper compartment and the printer compartment. You can slide it in about one-quarter inch before it stops.

6.While holding the paper in place, press the rocker switch to the Paper Feed position. The printer will activate, and a rubber roller will pull the paper into the printer compartment. Hold the switch in the Paper Feed position until the paper emerges from the top of the printer mechanism.

7.When an inch of paper has emerged from the top of the printer, release the Paper Feed button.

8.Now pull the paper through the printer, until several inches are exposed.

9.Slide the paper through the slot in the printer cover.

2

Image 7
Contents Printer for a & D Scales & Balances Page Table of Contents Print Speed Paper Power SpecificationsPage Introduction InstallationPage Page To Remove the Paper Roll Operation MaintenanceChanging the Printer Ribbon Page Printer Test and Setup Configure menu Custom menu SET Clock menu ConfigureBaud Rate Data Bits Load DefaultsFont BUSY-LINE BUSY-BUFFER XON/XOFF-LINE XON/XOFF-BUFFER NoneCustom Page Print Ready Ext Ch SetDOW Pin No CommunicationControl Codes Line Feed Code Number Code Codes 14Example Run Page Character Code Total Page Width MM/DD/YY Custom Menu Default TablePage Warranty and Service Information