A&D AD-1191 instruction manual Introduction, Installation

Page 6

Introduction

This manual is split into the following main sections:

Introduction

Installation

Operation

Maintenance

Printer Test and Setup

Communication

Default Settings

Installation

Installing the Paper

Follow the precautions listed below when setting up your printer. They are designed to help you keep your printer working at its best.

-Plug your power supply into an appropriate grounded outlet.

-Place your printer on a flat hard surface, like a tabletop.

-Keep your printer out of direct sunlight.

1.Remove the printer cover by pressing on the groove patterns to pop the front edge up. Lift off the cover.

2.Press the rocker switch to the left. The light will go off.

3.Unroll several inches of the paper.

1

4.Cut a straight edge on the paper roll if it is jagged.

Image 6
Contents Printer for a & D Scales & Balances Page Table of Contents Specifications Print Speed Paper PowerPage Installation IntroductionPage Page To Remove the Paper Roll Maintenance OperationChanging the Printer Ribbon Page Printer Test and Setup Configure Configure menu Custom menu SET Clock menuLoad Defaults Baud Rate Data BitsBUSY-LINE BUSY-BUFFER XON/XOFF-LINE XON/XOFF-BUFFER None FontCustom Page Ext Ch Set Print ReadyDOW Communication Pin NoControl Codes Line Feed Code Codes 14 Number CodeExample Run Page Character Code Total Page Width MM/DD/YY Default Table Custom MenuPage Warranty and Service Information