A&D AD-1191 instruction manual Specifications, Print Speed Paper Power

Page 4

Specifications

Interface-Serial

Character Buffering

Print Method

Character Matrix

Character Spacing

Line Feed Spacing

Print Speed

Paper

Power

AC Voltage

DC Voltage

External Dimensions Operating Temp.

Available baud rates:

300, 600, 1200, 2400, 4800, 9600, 19200 Voltage levels:

RS-232C: -9 Volts to + 9 Volts

Character format:

Standard ASCII character set—10 or 11 bits per character, 7 or 8 data bits.

Even or odd parity selection for 7 data bits. Bit mapped graphics—10 bits per character required

Busy signal - Clear to Send (CTS) or XON-XOFF

1.5K standard

8K optional

Approximately 9500 byte capacity with option installed. Impact dot matrix

5 x 8 or 5 x 5

 

24 column:

12.8 characters/inch

32 column:

17 characters/inch

40 column:

21 characters/inch

7.6lines per inch, character mode

9.1lines per inch, graphic mode

38 lines per minute for 24 column

33 lines per minute for 32 and 40 column

Table top:

2.25"W x 2.75"D; 0.44" I.D.

Panel mount:

2.25"W x 1.25"D

1 Watts (idle), 10 Watts (while printing)

9 VAC (120 VAC stepdown converter included) Multi-national converters optional

Optional 9-12 VDC

100mA idle, 1500mA with 100% printing, 2.9A peak with 100% printing

4.1"W x 4.5"L x 2"H

5ºC to 40ºC, 41ºF to 104ºF

Image 4
Contents Printer for a & D Scales & Balances Page Table of Contents Specifications Print Speed Paper PowerPage Installation IntroductionPage Page To Remove the Paper Roll Maintenance OperationChanging the Printer Ribbon Page Printer Test and Setup Configure Configure menu Custom menu SET Clock menuLoad Defaults Baud Rate Data BitsBUSY-LINE BUSY-BUFFER XON/XOFF-LINE XON/XOFF-BUFFER None FontCustom Page Ext Ch Set Print ReadyDOW Communication Pin NoControl Codes Line Feed Code Number Code Codes 14Example Run Page Character Code Total Page Width MM/DD/YY Default Table Custom MenuPage Warranty and Service Information