Siemens 5890 manual Advanced Setup

Chapter 5 Advanced Setup

This chapter describes how to configure advanced features on the router. Advanced features are listed below. To configure one of these features, click the link on the left navigation pane of the Router Information page.

WAN Selection	Select WAN physical layer mode.
Remote File Configuration	Add, delete, and modify remote routers to which the target
	router can connect
DMZ	Configure unrestricted two-way communication with servers or
	individual users on the internet.
Router Clock	Set the date and time on your router.
DHCP	View and configure the current DHCP settings.
Quality of Service (QoS)	Configure QoS, which actively manages network resources to
	sustain service levels for priority applications.
Routing Table Configuration	Configure multiple routing tables for a single host.
Dial Backup	Enable a backup connection to the Internet through an internal
	V.90 (model 5835 only) or an external asynchronous modem
	connected to the Console port.
ATM	Define the level of service for each configured interface (Virtual
	Path (VP) and Virtual Circuit (VC) connections).
Switch Management	Manage the Ethernet 10/100 switching ports located on the
	rear panel of the router.
Command Line Interface	Enter any CLI command over the web interface. For complete
	command line syntax, refer to the Command Line Interface
	Guide.
File Editor	Create and edit files stored on the router. These files contain
	configuration and other data used by the router.

SIEMENS 39