SIEMENS 5890 DSL Router | Chapter 5 Advanced Setup |
User’s Guide | QoS |
|
|
5.In Source IP, select one of the following:
•From/To: Enables source address checking. Specify the source IP address or range of IP addresses that must match for this policy to be used.
•Do not care: Disables source address checking.
6.In Dest IP, select one of the following:
•From/To: Enables destination address checking. Specify the destination IP address or range of IP addresses that must match for this policy to be used.
•Do not care: Disables destination address checking.
7.In Protocol, select one of the following:
•By number: Enter the protocol number to match in the protocol check.
•From the
•Do not care: Disables protocol checking.
8.In Source Port, select one of the following:
•From/To: Enter the source port or range of source ports to match in the source port check.
•From the
•Do not care: Disables source port checking.
9.In Destination Port, select one of the following:
•From/To: Enter the destination port or range of destination ports to match in the destination port check.
•From the
•Do not care: Disables destination port checking.
10.From the Priority
11.In Code Point - incoming and Code Point - outgoing, select one of the following:
•Click the button next to the box to specify the Code Point. Be sure to enter the Code Point in the appropriate field.
•Click Default to accept the default Code Point.
12.In Bidirection, select one of the following:
•On: Enables bidirectional operation of the policy.
•Off: Disables bidirectional operation of the policy.
13.In Start Time, specify the time of day when the policy becomes active.
14.In Duration, specify the time period for the policy to remain active.
15.In Repetition, select one of the following:
•Always on: Policy is applied every day.
•At: Policy is applied only one time on the specified month (MM), day (DD), and year (YY).
•Every: Policy is applied on the specified day of the week.
16.Click Save.
SIEMENS | 50 |