SIEMENS 5890 DSL Router | Chapter 5 Advanced Setup |
User’s Guide | QoS |
|
|
•Priority. Priority determines the order in which packets will be processed by the router.
•Weight. Weight determines the amount of bandwidth to be allocated to a given application.
The router supports four priority levels; High, Medium, Normal and Low. A weight value can be assigned to each of these priority levels from a minimum of 1 to a maximum of 255.
To configure QoS:
1.Click QoS in the left navigation pane of the Router Information page. This displays the QoS Configuration page. This page shows the current settings as well as provides a means to change the current settings.
2.Select one of the following from QoS Status to enable or disable QoS:
•On: QoS will forward packets and set diffserv marking based on user defined mapping rules and enabled QoS policies.
•Off: QoS will forward packets based on
3.To enable or disable marking of the Differentiated Services field of the IP header, select one of the following from DiffServ Status:
•On: QoS will mark the DiffServ field according to the QoS Policies and
•Off: DiffServ is not marked; this is DiffServ pass through.
4.Assign weight values to four different priorities. This can be a number between 1 and 255.
5.Click Apply.
6.Configure QoS policies.
SIEMENS | 48 |