SIEMENS 5890 DSL Router | Chapter 4 User Setup |
User’s Guide | User Management |
|
|
Configure the TacPlus Server
Tacplus allows access control and user authentication to be managed from a remote server.To configure the Tacplus Server:
1.Click Configure Tacplus Server on the left navigation pane of the User Management page. This displays the Tacplus Server Configuration page.
2.In Timeout, enter the number of seconds to between retry attempts when the Tacplus Server cannot be reached.
3.In Retry, enter the number of times the Tacplus Server should be contacted before attempting to connect to the secondary server.
4.In CACHE Timeout, enter the number of seconds that must pass before the user must be authenticated again.
5.For Primary and optionally Secondary servers, provide the IP Address, Port, and Secret for accessing the Radius Server. The Secret is used to authentication requests between servers.
SIEMENS | 35 |