Siemens 5890 manual IKE Peers Definition

SIEMENS 5890 DSL Router	Chapter 6 Security Setup
User’s Guide	IKE/IPSec Configuration

IKE Peers Definition

IKE peers are those devices known to your internal modem as capable of participating in IKE connections. To define a new IKE Peer:

1.Click Create next to IKE Peers from the Advanced IKE/IPSec Setup page. This displays the IKE Peer Definition page.

2.In IKE Peer Name, enter a logical name for an IKE Peer. This name is of no importance to the remote IKE peer. Choose a name that is meaningful to you.

3.In Pre-shared Secret, enter a case-sensitive character string used for authentication. This secret can be up to 256 characters, with no spaces or non-printable characters. The pre-shared secret must be mutually agreed upon by both parties to the IKE connection.

4.In Peer Gateway IP Address, enter the IP address of the gateway at the remote end of the IKE connection. If the remote IKE peer does not have a fixed or permanent IP address, enter “0.0.0.0” to use Aggressive Mode in Phase 1 negotiations. (Your system supports two Phase 1 IKE modes: Main and Aggressive. Use Main Mode when both the source and destination IP addresses are known and use Aggressive Mode when either the source or destination IP addresses could change.)

5.Click Apply.

SIEMENS 82