Siemens CL-110 user manual Lan

Page 50

LAN.

Primary IP Address: 192.168.1.1

Subnet mask: 255.255.255.0

Start IP Address: 192.168.1.2

End IP Address: 192.168.1.254

7.Check Configure the second IP Address and Subnet Mask for LAN Interface and type in the second IP address and subnet mask. Then click Next.

Secondary IP Address: 10.3.75.49

Subnet mask: 255.255.255.248

8.Check the network information. Make sure the settings match the settings provided by ISP. Click Finish.

9.Now the router is well configured. You can access into Internet.

Image 50

Contents User’s Manual Rev 2006/02/09Safety Notes FCC Features PrefaceSecurity Features Bridging FeaturesRouting Features Configuration and ManagementUnpacking Subscription for Adsl Service Page Physical Outlook LED IndicatorsOverview Front PanelRear Panel VACChoosing a place for the Adsl Router System Requirement and InstallationSystem Requirement Connecting the Adsl Router For Windows Install the USB DriverFor Windows ME Page For Windows XP Page Uninstall the USB Driver For Windows Configuration Page Configuration For Windows XP Configuration Page Setting TCP/IP Option 1 If you have no TCP/IP protocol, click Add Configuration Page For Windows ME For Windows NT Highlight TCP/IP Protocol and click OKConfiguration Page For Windows Page Properties Option 1 If you have no TCP/IP Protocol, click InstallPanel and then click Network Internet Connections Click Internet ProtocolTCP/IP and then click OKConfigure PC to get IP address from Dhcp Enable Obtain an IP address automatically and then click OK Renew IP Address on Client PC For Windows 98MEFor Windows NT For Windows Configuration Connecting and Accessing Internet Description PPP over ATM PPPoA ModeConfiguration PPP over ATM PPPoA IP Extension Mode Go to Advanced Internet Connections. And click AddPPP over Ethernet PPPoE Mode ISPPPP over Ethernet PPPoE IP Extension Mode Numbered IP over ATM IPoA IP Address Subnet Mask Gateway Numbered IP over ATM IPoA+NAT LAN Unnumbered IP over ATM IPoA Primary DNS server Secondary DNS serverIP Address Subnet Mask Gateway Unnumbered IP over ATM IPoA+NAT Primary IP Address Subnet maskPage Bridge Mode Web Configuration Using Web-Based ManagerLanguage To Have the New Settings Take EffectOutline of Web Manager Connect to Internet Quick SetupQuick Start Connection TypeConnection Mode PPP over ATM/ PPP over Ethernet Choose PPPoA or PPPoE and click NextAlways On PPP PasswordPPP Username Dial on DemandLeased Time Dhcp Server OffIP over ATM NoneSubnet Mask Connection Mode Bridging MTU Status OverviewAdsl Line Adsl BER TestDhcp Table Internet ConnectionTraffic Statistics Routing TableConnection Mode Local Network Dhcp Server Advanced SetupLocal Network- IP Address Relay On Server and Relay OffPage Adding a New One Internet-Connections SettingLocal Network UPnP VPI Virtual Path IdentifierPage Internet-IGMP Proxy Igmp Proxy EnabledInternet-DNS Server Internet ConnectionInternet Adsl Settings IP Routing Static RouteRemove Static Route Configuring Other Routers on Your LANGateway IP Address DestinationIP Routing Dynamic Routing Operation ModeEnabled Adsl RouterConnection Mode Virtual Server-Port Forwarding User defined IP Address seen by Internet UsersPre-defined From Internet Host IP Address Connecting to the Virtual ServersVirtual Server-Port Triggering Virtual Server DMZ Host Virtual Server Dynamic DNS Select the direction to filter packets FirewallFiltering by IP address Source/Destination IP address Allow TrafficProtocol Port RangeQuality of Service Bridge QoSSource IP Address/ Subnet Mask IP type of ServiceIPQoS Source PortVoice Quality Port MappingDestination Port Group Name Available InterfacesDiagnostics ManagementAdmin Account Remote AccessSystem Log Configure System LogInterntet Time Viewing System Log Snmp Setting Reset Router Backup ConfigUpdate Firmware UPnP for XP Page Problems with WAN TroubleshootingProblems with LAN Problems with Upgrading ARP Address Resolution Protocol GlossaryVPI Virtual Path Identifier & VCI Virtual Channel Identifier Glossary Page Appendix a Specifications Interface One RJ-11 port for Adsl connectionPage Appendix B Server Setup for 802.1x Client Getting Client CertificateYes Appendix C Weee B2C