Siemens CL-110 user manual Bridge Mode, IP Address Subnet Mask Gateway

Chapter 3:Accessing Internet

Bridge Mode

Default Private IP 192.168.1.1

ISP	STM-1	Loop
(Internet Service Provider)			PPPoE
			Client S/W
BRAS	DSLAM	ADSL	Hub
		Router
AAA
RDAIUS
Server			PC(S)
*BRAS: Broadband	PPP over Ethernet
Remote Access Server

Bridge Mode

Description:

In this example, the ADSL Router acts as a bridge which bridging PC IP address from LAN to WAN. PC IP address can be a static public address that is pre-assigned by ISP or a dynamic public address that is assigned by ISP DHCP server, or can be got from PPPoE software.

Therefore, it does not require a public IP address. It only has a default private IP address (192.168.1.1) for management purpose.

Configuration:

1.Choose a client PC and set the IP as 192.168.1.x (x is between 2 and 254) and the gateway as 192.168.1.1.

2.Start up your browser and type 192.168.1.1 as the address to enter the web-based manager.

3.Go to Quick Start -Quick Setup. Uncheck Auto Scan Internet Connection (PVC). Type in the VCI and VPI value. Then click the Next button. eg:

VPI – 0 VCI – 32

4.On the Configure Internet Connection -Connection Type page, select the Bridging then click the Next button.

5.In the Configure LAN side Settings page, type in the IP address and subnet mask for your LAN. Finally click Next. eg:

Primary IP address:192.168.1.1 Subnet Mask:255.255.255.0

6.Check the network information. Make sure the settings match the settings provided by ISP. Click Finish.

7.Set TCP/IP for your computer. Specify an IP Address, subnet mask and set default gateway. eg:

IP Address: 10.3.86.81

Subnet Mask: 255.255.255.248

Gateway: 10.3.86.1

8.Click OK. Now the router is well configured. You can access into Internet.