Siemens CL-110 user manual For Windows ME

Page 29

Chapter 3: Configuration

For Windows ME

1.Click on the Start menu, point to Settings and click on Control Panel.

2.Double-click the Network icon.

3.The Network window appears. On the Configuration tab, check out the list of installed network components.

Option 1: If you have no TCP/IP protocol, click Add.

Option 2: If you have TCP/IP protocol, go to Step 6.

4.Highlight Protocol and click Add.

5.On the left side of the windows, highlight Microsoft and then select TCP/IP on the right side. Then click OK.

6.While returning to Network window, highlight TCP/IP protocol for your NIC and click Properties.

7.On the IP Address tab, select Specify an IP address. Enter the IP address: 192.168.1.x (x is between 2 and 254), Subnet Mask: 255.255.255.0 and Default gateway: 192.168.1.1. Then click OK.

8.While returning to the Network window, click OK.

Image 29
Contents Rev 2006/02/09 User’s ManualSafety Notes FCC Preface FeaturesRouting Features Bridging FeaturesSecurity Features Configuration and ManagementUnpacking Subscription for Adsl Service Page Overview LED IndicatorsPhysical Outlook Front PanelVAC Rear PanelChoosing a place for the Adsl Router System Requirement and InstallationSystem Requirement Connecting the Adsl Router For Windows Install the USB DriverFor Windows ME Page For Windows XP Page Uninstall the USB Driver For Windows Configuration Page Configuration For Windows XP Configuration Page Setting TCP/IP Option 1 If you have no TCP/IP protocol, click Add Configuration Page For Windows ME Highlight TCP/IP Protocol and click OK For Windows NTConfiguration Page For Windows Page Panel and then click Network Internet Connections Option 1 If you have no TCP/IP Protocol, click InstallProperties Click Internet ProtocolTCP/IP and then click OKConfigure PC to get IP address from Dhcp Enable Obtain an IP address automatically and then click OK For Windows 98ME Renew IP Address on Client PCFor Windows NT For Windows Configuration Connecting and Accessing Internet Description PPP over ATM PPPoA ModeConfiguration Go to Advanced Internet Connections. And click Add PPP over ATM PPPoA IP Extension ModeISP PPP over Ethernet PPPoE ModePPP over Ethernet PPPoE IP Extension Mode Numbered IP over ATM IPoA IP Address Subnet Mask Gateway Numbered IP over ATM IPoA+NAT LAN Primary DNS server Secondary DNS server Unnumbered IP over ATM IPoAIP Address Subnet Mask Gateway Primary IP Address Subnet mask Unnumbered IP over ATM IPoA+NATPage Bridge Mode Using Web-Based Manager Web ConfigurationLanguage To Have the New Settings Take EffectOutline of Web Manager Quick Start Quick SetupConnect to Internet Connection TypeConnection Mode Choose PPPoA or PPPoE and click Next PPP over ATM/ PPP over EthernetPPP Username PPP PasswordAlways On Dial on DemandDhcp Server Off Leased TimeNone IP over ATMSubnet Mask Connection Mode Bridging MTU Overview StatusAdsl BER Test Adsl LineTraffic Statistics Internet ConnectionDhcp Table Routing TableConnection Mode Local Network Dhcp Server Advanced SetupLocal Network- IP Address Server and Relay Off Relay OnPage Local Network UPnP Internet-Connections SettingAdding a New One VPI Virtual Path IdentifierPage Internet-DNS Server Igmp Proxy EnabledInternet-IGMP Proxy Internet ConnectionIP Routing Static Route Internet Adsl SettingsGateway IP Address Configuring Other Routers on Your LANRemove Static Route DestinationEnabled Operation ModeIP Routing Dynamic Routing Adsl RouterConnection Mode Virtual Server-Port Forwarding User defined IP Address seen by Internet UsersPre-defined From Internet Host IP Address Connecting to the Virtual ServersVirtual Server-Port Triggering Virtual Server DMZ Host Virtual Server Dynamic DNS Select the direction to filter packets FirewallFiltering by IP address Protocol Allow TrafficSource/Destination IP address Port RangeBridge QoS Quality of ServiceIPQoS IP type of ServiceSource IP Address/ Subnet Mask Source PortVoice Quality Port MappingDestination Port Available Interfaces Group NameManagement DiagnosticsRemote Access Admin AccountSystem Log Configure System LogInterntet Time Viewing System Log Snmp Setting Reset Router Backup ConfigUpdate Firmware UPnP for XP Page Problems with WAN TroubleshootingProblems with LAN Problems with Upgrading Glossary ARP Address Resolution ProtocolVPI Virtual Path Identifier & VCI Virtual Channel Identifier Glossary Page Interface One RJ-11 port for Adsl connection Appendix a SpecificationsPage Getting Client Certificate Appendix B Server Setup for 802.1x ClientYes Appendix C Weee B2C