Quick Start
The pages for the Quick Start provide user a quick way to set for the router. If you do not know more about the router, you can use the Quick Start pages to adjust basic settings to make your router activating.
Connect to Internet
This is a quick way to connect to Internet by using PPPoE interface, click Connect to Internet to open the web page.
Enter the user name and password for your ADSL router and click Connect.
The system will connect automatically, then you can access Internet.
Quick Setup
The quick setup wizard will guide you to configure the DSL router through some steps.
Auto Scan Internet Connection (PVC): The default setting is checked. If there is no any PVC configured in your ADSL router, you can check this item. Otherwise, please uncheck this box.
VPI (Virtual Path Identifier): Identifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255. To enter the setting, please refer to the setting that the ISP gave you.
VCI (Virtual Channel Identifier): Identifies the virtual channel endpoints in an ATM network. The valid range is from 32 to 65535 (1 to 31 is reserved for
After finished entering the VPI/VCI value, please click Next for next step.
Connection Type
The system provides several protocols for you to choose. Your ISP will offer you the most suitable settings of the protocol. Before you set this page, please refer to the protocol that your ISP gave you.