Wacom DTI-520 manual General Specifications

Page 32
-10–60 degrees C, 20–90%RH (conditions where condensation does not form) (at 60 degrees C maximum storage humidity is 38%; at 90% humidity, maximum storage temperature is 42 degrees)

Specification

General Specifications

Physical dimensions(W D H):344 × 300 × 49 mm (excluding stand)

Weight:

4.6kg (including stand)

Main unit input voltage:

DC12V

Power consumption:

23 W or less (DC12 V)

Usage temperature and

 

humidity ranges:

5–35 degrees C, 20–80%RH (conditions where condensation does not form)

Storage temperature and

 

humidity ranges:

 

User's Guide

LCD Display Specifications

Display:

a-Si TFT Active Matrix LCD

Screen size:

15 inches

Resolution (75Hz Max.):

1024 × 768 dot (XGA), 800 × 600 dot (SVGA), 640 × 480 dot (VGA)

Pixel pitch:

0.297(W) × 0.297 (H) mm

Display dimensions:

304.1 × 228.1mm

Color depth:

253 level; 16,190,000 colors

Signal inputs:

Analog RGB input 0.7 Vp-p, 75Ω, straight polarity

 

Synchronous inputs: TTL level, 2.2 kΩ, polarity freedom (horizontal / vertical separation or

 

composite synchronous input)

 

Digital inputs: DVI 1.0

 

Synchronous frequency: horizontal: 30 – 56.5 kHz; vertical 45 – 75 Hz .(When resolution

 

is 1024 × 768 dot (XGA), vertical frequency is in the 45-70Hz range.)

 

Scanning method: all non-interlace

Plug and Play:

DDC2B

 

 

*On rare occasions, light and dark dots may appear on a small part of the display screen. This condition does not indicate product failure.

*Afterimages may remain on the screen after still images have been displayed for a long period of time, but these will disappear after a short period of time.

Tablet Specifications

Reading method:

Electromagnetic induction method

Maximum reading range:

304.1 × 228.1mm

Reading resolution:

Maximum 20 lpmm (0.05 mm)

Reading accuracy:

+/- 0.5 mm; four corners(25mm wide, 80mm long from each corner of four "L" shaped

 

area) to be +/- 1.5 mm.

Maximum reading height:

5mm

Data transfer rate:

Maximum 100 points per second

Pressure level:

512 levels

Interface:

USB, RS-232C

Grip Pen Specifications (IP-110)

Side switch type

Double

Pressure functions:

Pen nib switch

Pen nib switch type

 

/retraction motion:

Non-retractable/0.2 mm or less

Load when pen nib is switched on:

30 g or less

Physical dimensions and weight:

12.5 × 147.5 mm, 10 g

 

 

31

UM-0314(A)_EN.indd 31

2007/11/12 16:53:22

Image 32
Contents Users Guide Do not open the back cover Safety PrecautionsRegarding the power plug and power adapter Do not use organic solvents to clean this product When connecting the power plugWhen not using this product for a long period of time Do not let the product get wetUsers Guide Warranty Exclusions Please be aware of the following regarding the LCD displayTable of Contents Top Back Component FunctionsFront Using the Penholder Opening the StandInstalling DTI-520 on a Mount Arm UnscrewUsers Accessory CheckGuide Connecting DTI-520 5Turn on your computerUsers Guide Installing the Tablet Driver Windows SetupMacintosh Setup Uninstalling the Tablet DriverSwitching Display Images Auto-Adjust FunctionDTI-520 Power Saving Function DTI-520 DisplayProcedure Blurring and Protrusion of the Picture from the LCD PanelOn-Screen Display OSD Menu Buttons Using the OSD MenuHow to Use the OSD Menu Reset Types of OSD MenusCommon Screens Contrast Language Brightness BacklightSignal Source Vertical Center VGA only Pitch VGA onlyScreens that Display with a Video Cable Connection Saturation SharpnessDefault Switch Function Settings PenParts of the Pen and Their Functions Gripping the PenUsing the Eraser Basic Operations of the PenMoving the Pointer Clicking and Double-clickingUsing the Control Panel Displaying the Control PanelControl Panel Basics Opening the Control Panel in WindowsSwitch and Button Settings Function Names DescriptionCustomizing the Pop-up Menu Open/RunSynchronizing the Positions of the Pen Tip and Pointer 【Important】 Using Multiple Interactive Pen DisplaysIf Another Monitor Name is Displayed in the Monitor Field Supplementary Information Removing StainsReplacing the Pen Nib Remove the pen nib Insert a new nibAttaching the Pen Tether Troubleshooting Display TroubleshootingIf One of These Messages Should Appear Message What to DoIf One of These Conditions Should Appear Condition What to Do ReferenceCondition What to Do General TroubleshootingCondition Troubleshooting for Windows Troubleshooting for MacintoshSpecification General SpecificationsWarranty Limited warrantyWarranty service outside of the U.S.A. and Canada Obtaining Technical Support UM-0314A