Wacom manual Installing DTI-520 on a Mount Arm, Unscrew

Page 9

Component Functions

Installing DTI-520 on a Mount Arm

This product conforms to the Video Electronics Standard Association’s (VESA) Flat Panel Monitor Physical Mounting Interface Standard (FPMPMI).

This product can be removed from the stand and mounted on such apparatuses as a VESA-standard mount arm. In order to do this, M4/0.7 mm screws, which are not included with the product, are needed. Use screws that will, at the time of installation, penetrate the surface of the product by no more than 15 mm. Use of longer screws may result in damage to internal parts of the product.

1Make sure that both your computer and the product are turned off and that all cables are disconnected.

2Place the display unit face down on a flat surface. To prevent harm to the front of

the unit, first spread a cloth or other similar material on the flat surface.

3Remove the four screws that hold the stand to the unit.

Unscrew

4Using four M4/0.7 mm screws, securely mount the arm or similar apparatus to the back of the unit.

Caution

When installing the unit on a mount arm or other stand, always follow the directions in the instruction booklet for the mount arm or stand, as well as the instructions contained in this document. Incorrect installation may result in the product coming loose and falling and possibly causing product failure.

5Connect the cables and save the screws that you removed in step 3.

UM-0314(A)_EN.indd 8

2007/11/12 16:53:12

Image 9

Contents Users Guide Safety Precautions Regarding the power plug and power adapterDo not open the back cover When connecting the power plug Do not use organic solvents to clean this productWhen not using this product for a long period of time Do not let the product get wetUsers Guide Please be aware of the following regarding the LCD display Warranty ExclusionsTable of Contents Component Functions FrontTop Back Opening the Stand Using the PenholderUnscrew Installing DTI-520 on a Mount ArmAccessory Check GuideUsers 5Turn on your computer Connecting DTI-520Users Guide Windows Setup Installing the Tablet DriverMacintosh Setup Uninstalling the Tablet DriverAuto-Adjust Function Switching Display ImagesDTI-520 Power Saving Function DTI-520 DisplayBlurring and Protrusion of the Picture from the LCD Panel ProcedureUsing the OSD Menu How to Use the OSD MenuOn-Screen Display OSD Menu Buttons Types of OSD Menus ResetCommon Screens Contrast Language Brightness BacklightVertical Center VGA only Pitch VGA only Signal SourceScreens that Display with a Video Cable Connection Saturation SharpnessPen Default Switch Function SettingsParts of the Pen and Their Functions Gripping the PenBasic Operations of the Pen Using the EraserMoving the Pointer Clicking and Double-clickingDisplaying the Control Panel Using the Control PanelControl Panel Basics Opening the Control Panel in WindowsFunction Names Description Switch and Button SettingsOpen/Run Customizing the Pop-up MenuSynchronizing the Positions of the Pen Tip and Pointer Using Multiple Interactive Pen Displays If Another Monitor Name is Displayed in the Monitor Field【Important】 Removing Stains Supplementary InformationReplacing the Pen Nib Remove the pen nib Insert a new nibAttaching the Pen Tether Display Troubleshooting TroubleshootingIf One of These Messages Should Appear Message What to DoCondition What to Do Reference If One of These Conditions Should AppearGeneral Troubleshooting ConditionCondition What to Do Troubleshooting for Macintosh Troubleshooting for WindowsGeneral Specifications SpecificationLimited warranty WarrantyWarranty service outside of the U.S.A. and Canada Obtaining Technical Support UM-0314A