Wacom DTI-520 manual Synchronizing the Positions of the Pen Tip and Pointer

Synchronizing the Positions of the Pen Tip and Pointer

Make the necessary adjustments so that when the pen nib is brought near the LCD screen, the pointer displays properly in the area where the pen nib is placed (parallactic adjusting).

*When using an analog RGB input type of LCD pen tablet, please refer to “Blurring and Protrusion of the Picture from the LCD Panel” on P. 14 and make any necessary adjustments to the screen.

*When using multiple tablets, see page 24.

1Click on Calibrate... and the screen used for making adjustments will appear.

2Click in the middle of the cross mark in the upper left-hand corner of the screen while sitting in your normal seating position with the pen nib and the cross mark will move to the bottom right-hand side of the screen.

3Click again in the middle of the cross mark that is now in the bottom right-hand corner of the screen while sitting in your normal seating position and the cross mark will disappear. The process of synchronizing positions is now complete.

Click on the OK button in the lower part of the screen to close the screen.

User's Guide

23

UM-0314(A)_EN.indd 23

2007/11/12 16:53:19