Toshiba B-SA4TM SERIES, EO1-33047 owner manual Place the Media Holder Ass’y into the printer

2. PRINTER SETUP

ENGLISH VERSION EO1-33047

2.3 Loading the Media

2.3Loading the Media (Cont.)

5.Put the Media Holder (Left) onto the Media Shaft. Push the Media Holder (Left) and the Media Holder (Right) against the media until the media is held firmly in place. This will automatically centre the media.

Media Holder (Right)

Media Holder (Left)

6.Fold the Release Lever to lock the Media Holder (Left).

Media Holder (Left)

Release Lever

CAUTION!

Make sure that the Upper Sensor Ass’y is closed when placing the Media Holder Ass’y into the printer. If the Upper Sensor Ass’y is opened, it may be damaged.

NOTE:

Be careful of the orientation of the Media Holder Ass’y and the media.

7.Place the Media Holder Ass’y into the printer.

Media Holder Ass’y

Upper Sensor

Ass’y

8.Slightly push the Upper Sensor Lever inside (c), and open the Upper Sensor Ass’y (d).

dc

Upper Sensor Lever

Upper Sensor

Ass’y

E2- 4