Toshiba e-STUDIO206, e-STUDIO166 manual Other points, 10 cm 80 cm

Page 17

Caution

yAvoid placing the equipment in a place unsuitable for its weight and also make sure the sur- face is level.

Remember that if the equipment falls over, serious injuries could result. Weight of the equipment: approx. 33.7 kg.

yWhen removing the plug from the outlet, do not pull the power cable. Always hold the plug when removing it from the outlet. If the power cable is pulled, the wires may become broken and this could cause a fire or give you an electric shock.

yMake sure that the ventilation holes are not blocked up.

If the temperature within the equipment becomes too high, a fire could result.

Other points

yThe socket outlet shall be installed near the equipment and shall be easily accessible.

yMake sure that there is enough space around the system to facilitate changing of parts, maintenance and clearing paper jams.

If there is insufficient space, some operations, such as bypass feeding, will become difficult and the equipment could even break down.

To insure optimal operation, allow clearances of at least 80 cm on the right, and 10 cm on the left and behind.

10 cm

10 cm

80 cm

yBe sure to fix the power cable securely so that no one trips over it.

yAdverse environmental conditions may affect the safe operation and performance of the equipment, and the equipment could break down.

-Avoid locations near windows or with exposure to direct sunlight.

-Avoid locations with drastic temperature fluctuations.

-Avoid too much dust.

-Avoid locations that suffer from vibration.

yAllow the air to flow freely and make sure of ventilation.

With inadequate ventilation, the unpleasant odor released by the ozone will begin to domi- nate the atmosphere.

General Precautions 15

Image 17

Contents Operators Manual for Copying Functions Page Preface PrefaceWorking environment For Germany onlyPage Lineup of our manuals Before Reading This ManualDescription of original/paper direction How to read this manual Signal in this manualTrademarks Contents 100 Copying in Same Page Order as Originals Sort Copying111 Cleaning charger 101 Cleaning transfer charger 102Contents Recommended toner cartridges Toshiba Quality Is Second to NoneCartridge detecting function Toner remaining check functionGeneral Supplies / PartsToner Ecological energy-saving design Features of e-STUDIO166/206Functions extended by various options When installing or moving General Precautions10 cm 80 cm Other pointsWhen using the equipment Position of Certification label, etc When handling supplies During maintenance or inspectionPoration Disclaimer NoticeEnergy Star programme Environmental InformationPreparation 2 Placing Copy Paper Preparation 1 Turning Power onDescription of Each Component Front / Right side Description of Each ComponentPlaten Cover Automatic Document Feeder optional, MR-2017Left side / Inner side Receiving tray Scanning area USB terminal 4-pinOriginal scale Platen sheetConfiguration of options Control panel Density adjustment buttons/lamps Original mode button/lampsLED display Copy qty. / zoom display selecting button/lampDrawer button/lamps Original setting lampCopy button/lamps Original button/lampsTurning power OFF Preparation 1 Turning Power onTurning power on Cancelling the energy saving mode Saving energy when not in use Energy saving modeTo turn the equipment into the energy saving mode manually Feeder Media type Paper size Maximum sheet Capacity *1 Preparation 2 Placing Copy PaperAcceptable media types Paper types not acceptable Recommended paperStoring paper Media type Product namePress down the paper plate Placing paper in drawersWiden the gap with both hands Place paper in the drawer Adjust the side guides to the desired paper sizeRegister the paper size into the equipment Do not let your fingers be caught when closing the drawerRegistering standard size A3, A4, A4-R, A5-R, B4 Preparation 3 Registering Size of Paper PlacedCode No Registering other standard sizesPreparation 3 Registering Size of Paper Placed Press the Start button Making Copies Using Bypass TrayPlacing Originals Setting position Type of origi When the built-in memory has become full during scanningPlacing Originals Acceptable originalsPlacing originals on the original glass Placing booklet-type originals such as books or catalogues Precautions for Automatic Document Feeder optional Using Automatic Document Feeder optionalWhen black streaks appear on the copied image Media types Maximum size Maximum number Paper weightPlacing originals on Automatic Document Feeder optional When placing a large amount of originals with a long widthCheck if paper is placed in the drawer Making CopiesPlace the original Select the copy modes as requiredWhen the paper has run out When the number of sheets exiting has exceededStopping/Resuming copying Press the CLEAR/STOP button during scanning or copyingPress the Interrupt button Interrupting copying and making another copy Interrupt copyMedia type Paper size Maximum sheet Capacity *1 Using Bypass TrayPreparation Registering paper size placed on bypass tray ST-R Folio Comp Using Bypass Tray Press the Start button Bypass copying on standard size paper Placed on the bypass tray is lit Using Bypass Tray Page Automatic paper selection APS Manual paper selection Default Settings Paper SelectionZooming In/Out Copy Image Contents Default setting at installation Default SettingsAutomatic paper selection APS Paper SelectionPlace the original on the Automatic Document Feeder Automatic paper selection APSPlace paper in the drawer Place the original Manual paper selectionSelecting the drawer of the equipment Automatic magnification selection AMS Zooming In/Out Copy ImageAutomatic magnification selection AMS Specifying reproduction ratio manuallyIf the Function Clear lamp is blinking and copying stops Specifying both the sizes of the original and the copy paper Press Zooming out or Specifying reproduction ratio manuallyDesired reproduction ratio appears Zooming in button untilZooming In/Out Copy Image Copying in Same Page Order as Originals Sort Copying Selecting Image Mode To adjust the density to the desired level Adjusting Density LevelTo return it to the automatic copy density mode DarkPage Settings and Management of Equipment All lamps on Sound on All lamps off Sound off Switching Operation Sound On/OffPress Button for more than two seconds Switch the display to check the rest of the total numberChecking Total Number Copied Page When Message Lamp is Lit/Blinking Paper Jams TroubleshootingCover open lamp When Message Lamp is Lit/BlinkingPaper empty lamp Toner lampRecommended toner cartridges Paper jam lamp Service call lampChecking position of paper jams When paper jams occur frequentlyPaper Jams Paper jams within Automatic Document Feeder optional When releasing jammed paperRaise the lever, and then open the upper cover Do not tear jammed paperPaper Jams Pull out the paper jammed on the bypass tray Paper jams on bypass trayPaper jam behind transfer unit Close the transfer unit and the side cover Paper jams within fuser unitPaper Jams Paper jams within Paper Feed Unit optional Hold down the green lever Replacing Toner CartridgeOpen the front cover Pull out the toner cartridge Clean the charger Replacing Toner Cartridge With the transfer charger wire Phenomenon Usual cause Countermeasure Before Calling Service TechnicianGeneral operation Original/Copy paper-related items Toner-related itemsImage trouble Tion Charger is dirty Clean the charger Page Daily Inspection 100 Maintenance and InspectionOriginal glass Guides Platen sheet Daily InspectionOpen the front cover Clean the charger Cleaning chargerCleaning transfer charger Daily Inspection Page Specifications and Options OPC STUDIO166/206 SpecificationsPaper size Feeder STUDIO166 STUDIO206 Continuous copying speedPaper Feed Unit Specifications of OptionsAutomatic Document Feeder Packing List Page Index 106 DP-1660/2060 OME06015700 Multifunctional Digital Systems