Toshiba e-STUDIO206, e-STUDIO166 manual Using Automatic Document Feeder optional

Page 47

Using Automatic Document Feeder (optional)

When a stack of originals are placed on the Automatic Document Feeder (optional), the originals are automatically scanned one by one. The following types of originals are available:

	Media types		Maximum size	Maximum number of	Paper weight
	Media types		Maximum size	sheets acceptable	Paper weight
				sheets acceptable
	Plain paper		297 mm x 432 mm	100 sheets	50 - 127 g/m2
				(or stack height 16 mm)

ySome media types may not be used.

yThe maximum number of sheets acceptable varies depending on the media types of the originals.

yA5 size originals must be placed in a landscape direction.

ySizes which the Automatic Document Feeder (optional) can detect automatically are A3, A4, A4-R, A5-R, B4, B5 and B5-R.

Precautions for Automatic Document Feeder (optional)

Do not use the following types of original since such types may cause a paper jam or damage to the equipment:

yExtremely wrinkled, folded or curled ones

yOnes with carbon paper

yTaped, pasted or cut-out ones

yClipped or stapled ones

yOnes with holes or tears

yDamp ones

yOverhead transparencies or tracing paper

yCoating paper (e.g. coated with wax)

yOnes with many holes punched (e.g. loose leaf paper)

The following types of originals are usable but need extra care:

yOnes which cannot be made to slide with the fingers or whose surface is specially treated (they may not be able to be separated from each other at feeding)

yFolded or curled ones (should be smoothed out before being used)

When black streaks appear on the copied image

If the scanning area or the guide area is dirty, image problems such as black streaks on the cop- ied image may occur. Weekly cleaning of these areas is recommended.

P.100 “Daily Inspection”

Placing Originals 45

Image 47

Contents Operators Manual for Copying Functions Page Preface PrefaceWorking environment For Germany onlyPage Lineup of our manuals Before Reading This ManualDescription of original/paper direction How to read this manual Signal in this manualTrademarks Contents 100 Copying in Same Page Order as Originals Sort Copying111 Cleaning charger 101 Cleaning transfer charger 102Contents Toner remaining check function Toshiba Quality Is Second to NoneRecommended toner cartridges Cartridge detecting functionGeneral Supplies / PartsToner Ecological energy-saving design Features of e-STUDIO166/206Functions extended by various options When installing or moving General Precautions10 cm 80 cm Other pointsWhen using the equipment Position of Certification label, etc When handling supplies During maintenance or inspectionPoration Disclaimer NoticeEnergy Star programme Environmental InformationPreparation 2 Placing Copy Paper Preparation 1 Turning Power onDescription of Each Component Automatic Document Feeder optional, MR-2017 Description of Each ComponentFront / Right side Platen CoverLeft side / Inner side Platen sheet USB terminal 4-pinReceiving tray Scanning area Original scaleConfiguration of options Control panel Copy qty. / zoom display selecting button/lamp Original mode button/lampsDensity adjustment buttons/lamps LED displayOriginal button/lamps Original setting lampDrawer button/lamps Copy button/lampsTurning power OFF Preparation 1 Turning Power onTurning power on Cancelling the energy saving mode Saving energy when not in use Energy saving modeTo turn the equipment into the energy saving mode manually Feeder Media type Paper size Maximum sheet Capacity *1 Preparation 2 Placing Copy PaperAcceptable media types Media type Product name Recommended paperPaper types not acceptable Storing paperPress down the paper plate Placing paper in drawersWiden the gap with both hands Place paper in the drawer Adjust the side guides to the desired paper sizeRegister the paper size into the equipment Do not let your fingers be caught when closing the drawerRegistering standard size A3, A4, A4-R, A5-R, B4 Preparation 3 Registering Size of Paper PlacedCode No Registering other standard sizesPreparation 3 Registering Size of Paper Placed Press the Start button Making Copies Using Bypass TrayPlacing Originals Acceptable originals When the built-in memory has become full during scanningSetting position Type of origi Placing OriginalsPlacing originals on the original glass Placing booklet-type originals such as books or catalogues Media types Maximum size Maximum number Paper weight Using Automatic Document Feeder optionalPrecautions for Automatic Document Feeder optional When black streaks appear on the copied imagePlacing originals on Automatic Document Feeder optional When placing a large amount of originals with a long widthSelect the copy modes as required Making CopiesCheck if paper is placed in the drawer Place the originalPress the CLEAR/STOP button during scanning or copying When the number of sheets exiting has exceededWhen the paper has run out Stopping/Resuming copyingPress the Interrupt button Interrupting copying and making another copy Interrupt copyMedia type Paper size Maximum sheet Capacity *1 Using Bypass TrayPreparation Registering paper size placed on bypass tray ST-R Folio Comp Using Bypass Tray Press the Start button Bypass copying on standard size paper Placed on the bypass tray is lit Using Bypass Tray Page Automatic paper selection APS Manual paper selection Default Settings Paper SelectionZooming In/Out Copy Image Contents Default setting at installation Default SettingsAutomatic paper selection APS Paper SelectionAutomatic paper selection APS Place the original on the Automatic Document FeederPlace paper in the drawer Place the original Manual paper selectionSelecting the drawer of the equipment Specifying reproduction ratio manually Zooming In/Out Copy ImageAutomatic magnification selection AMS Automatic magnification selection AMSIf the Function Clear lamp is blinking and copying stops Specifying both the sizes of the original and the copy paper Zooming in button until Specifying reproduction ratio manuallyPress Zooming out or Desired reproduction ratio appearsZooming In/Out Copy Image Copying in Same Page Order as Originals Sort Copying Selecting Image Mode Dark Adjusting Density LevelTo adjust the density to the desired level To return it to the automatic copy density modePage Settings and Management of Equipment All lamps on Sound on All lamps off Sound off Switching Operation Sound On/OffPress Button for more than two seconds Switch the display to check the rest of the total numberChecking Total Number Copied Page When Message Lamp is Lit/Blinking Paper Jams TroubleshootingToner lamp When Message Lamp is Lit/BlinkingCover open lamp Paper empty lampRecommended toner cartridges Paper jam lamp Service call lampChecking position of paper jams When paper jams occur frequentlyPaper Jams Do not tear jammed paper When releasing jammed paperPaper jams within Automatic Document Feeder optional Raise the lever, and then open the upper coverPaper Jams Pull out the paper jammed on the bypass tray Paper jams on bypass trayPaper jam behind transfer unit Close the transfer unit and the side cover Paper jams within fuser unitPaper Jams Paper jams within Paper Feed Unit optional Hold down the green lever Replacing Toner CartridgeOpen the front cover Pull out the toner cartridge Clean the charger Replacing Toner Cartridge With the transfer charger wire Phenomenon Usual cause Countermeasure Before Calling Service TechnicianGeneral operation Original/Copy paper-related items Toner-related itemsImage trouble Tion Charger is dirty Clean the charger Page Daily Inspection 100 Maintenance and InspectionOriginal glass Guides Platen sheet Daily InspectionOpen the front cover Clean the charger Cleaning chargerCleaning transfer charger Daily Inspection Page Specifications and Options OPC STUDIO166/206 SpecificationsPaper size Feeder STUDIO166 STUDIO206 Continuous copying speedPaper Feed Unit Specifications of OptionsAutomatic Document Feeder Packing List Page Index 106 DP-1660/2060 OME06015700 Multifunctional Digital Systems