Toshiba e-STUDIO166, e-STUDIO206 Drawer button/lamps, Original setting lamp, Copy button/lamps

Page 30

1PREPARATION

17.[DRAWER] button/lamps

Use this button to select a drawer or the bypass tray to be used as a paper source. The lamp of the paper source currently selected is lit. The lamp blinks when the selected drawer or tray is running out of paper.

When paper in the drawer or on the bypass tray has run out, see the following page to add paper:

P.31 “Preparation 2 - Placing Copy Paper”

18.Original setting lamp

The lamp is lit when originals are placed on the Automatic Document Feeder (optional). This lamp blinks in the following situations:

-When the original needs to be placed on the original glass (When the [START] button is pressed without the original cover being opened after copies are made)

-When the originals need to be placed on the Automatic Document Feeder (optional) (When a paper jam in the Automatic Document Feeder is released)

-When the Automatic Document Feeder (optional) on which the originals are placed is raised.

19.[COPY] button/lamps

Use this button to select the size of paper to be used. The lamp of the paper size currently selected blinks when this size of paper is not placed in the drawer or on the bypass tray. See the following page for details:

P.62 “Manual paper selection”

20.[ORIGINAL] button/lamps

Use this button to specify the size of an original.

P.66 “Specifying both the sizes of the original and the copy paper”

21.APS/AMS selecting button/lamps

Automatic paper selection (APS): The equipment detects the size of original and automati- cally selects the same size of copy paper.

P.61 “Paper Selection”

Automatic magnification selection (AMS): Set the size of copy paper to be used in advance. The equipment then detects the size of original and automatically selects the most suitable reproduction ratio to the copy paper.

P.64 “Automatic magnification selection (AMS)”

APS and AMS are available only when originals are placed on the Automatic Document Feeder (optional, MR-2017).

28 Description of Each Component

Image 30

Contents Operators Manual for Copying Functions Page Preface PrefaceFor Germany only Working environmentPage Before Reading This Manual Lineup of our manualsHow to read this manual Signal in this manual Description of original/paper directionTrademarks Contents Copying in Same Page Order as Originals Sort Copying 100Cleaning charger 101 Cleaning transfer charger 102 111Contents Cartridge detecting function Toshiba Quality Is Second to NoneRecommended toner cartridges Toner remaining check functionSupplies / Parts TonerGeneral Features of e-STUDIO166/206 Functions extended by various optionsEcological energy-saving design General Precautions When installing or movingOther points 10 cm 80 cmWhen using the equipment Position of Certification label, etc During maintenance or inspection When handling suppliesDisclaimer Notice PorationEnvironmental Information Energy Star programmePreparation 1 Turning Power on Description of Each ComponentPreparation 2 Placing Copy Paper Platen Cover Description of Each ComponentFront / Right side Automatic Document Feeder optional, MR-2017Left side / Inner side Original scale USB terminal 4-pinReceiving tray Scanning area Platen sheetConfiguration of options Control panel LED display Original mode button/lampsDensity adjustment buttons/lamps Copy qty. / zoom display selecting button/lampCopy button/lamps Original setting lampDrawer button/lamps Original button/lampsPreparation 1 Turning Power on Turning power onTurning power OFF Saving energy when not in use Energy saving mode To turn the equipment into the energy saving mode manuallyCancelling the energy saving mode Preparation 2 Placing Copy Paper Acceptable media typesFeeder Media type Paper size Maximum sheet Capacity *1 Storing paper Recommended paperPaper types not acceptable Media type Product namePlacing paper in drawers Press down the paper plateWiden the gap with both hands Adjust the side guides to the desired paper size Place paper in the drawerDo not let your fingers be caught when closing the drawer Register the paper size into the equipmentPreparation 3 Registering Size of Paper Placed Registering standard size A3, A4, A4-R, A5-R, B4Registering other standard sizes Code NoPreparation 3 Registering Size of Paper Placed Press the Start button Using Bypass Tray Placing OriginalsMaking Copies Placing Originals When the built-in memory has become full during scanningSetting position Type of origi Acceptable originalsPlacing originals on the original glass Placing booklet-type originals such as books or catalogues When black streaks appear on the copied image Using Automatic Document Feeder optionalPrecautions for Automatic Document Feeder optional Media types Maximum size Maximum number Paper weightWhen placing a large amount of originals with a long width Placing originals on Automatic Document Feeder optionalPlace the original Making CopiesCheck if paper is placed in the drawer Select the copy modes as requiredStopping/Resuming copying When the number of sheets exiting has exceededWhen the paper has run out Press the CLEAR/STOP button during scanning or copyingInterrupting copying and making another copy Interrupt copy Press the Interrupt buttonUsing Bypass Tray Media type Paper size Maximum sheet Capacity *1Preparation Registering paper size placed on bypass tray ST-R Folio Comp Using Bypass Tray Press the Start button Bypass copying on standard size paper Placed on the bypass tray is lit Using Bypass Tray Page Default Settings Paper Selection Zooming In/Out Copy ImageAutomatic paper selection APS Manual paper selection Default Settings Contents Default setting at installationPlace the original on the Automatic Document Feeder Paper SelectionAutomatic paper selection APS Automatic paper selection APSManual paper selection Place paper in the drawer Place the originalSelecting the drawer of the equipment Automatic magnification selection AMS Zooming In/Out Copy ImageAutomatic magnification selection AMS Specifying reproduction ratio manuallyIf the Function Clear lamp is blinking and copying stops Specifying both the sizes of the original and the copy paper Desired reproduction ratio appears Specifying reproduction ratio manuallyPress Zooming out or Zooming in button untilZooming In/Out Copy Image Copying in Same Page Order as Originals Sort Copying Selecting Image Mode To return it to the automatic copy density mode Adjusting Density LevelTo adjust the density to the desired level DarkPage Settings and Management of Equipment Switching Operation Sound On/Off All lamps on Sound on All lamps off Sound offSwitch the display to check the rest of the total number Checking Total Number CopiedPress Button for more than two seconds Page Troubleshooting When Message Lamp is Lit/Blinking Paper JamsPaper empty lamp When Message Lamp is Lit/BlinkingCover open lamp Toner lampRecommended toner cartridges Service call lamp Paper jam lampWhen paper jams occur frequently Paper JamsChecking position of paper jams Raise the lever, and then open the upper cover When releasing jammed paperPaper jams within Automatic Document Feeder optional Do not tear jammed paperPaper Jams Paper jams on bypass tray Pull out the paper jammed on the bypass trayPaper jam behind transfer unit Paper jams within fuser unit Close the transfer unit and the side coverPaper Jams Paper jams within Paper Feed Unit optional Replacing Toner Cartridge Open the front coverHold down the green lever Pull out the toner cartridge Clean the charger Replacing Toner Cartridge With the transfer charger wire Before Calling Service Technician General operationPhenomenon Usual cause Countermeasure Toner-related items Original/Copy paper-related itemsImage trouble Tion Charger is dirty Clean the charger Page Maintenance and Inspection Daily Inspection 100Daily Inspection Original glass Guides Platen sheetCleaning charger Open the front cover Clean the chargerCleaning transfer charger Daily Inspection Page Specifications and Options STUDIO166/206 Specifications OPCContinuous copying speed Paper size Feeder STUDIO166 STUDIO206Specifications of Options Automatic Document FeederPaper Feed Unit Packing List Page Index 106 DP-1660/2060 OME06015700 Multifunctional Digital Systems