Toshiba e-STUDIO166, e-STUDIO206 Recommended paper, Paper types not acceptable, Storing paper

Page 34

1 PREPARATION

Recommended paper

To ensure the best copy performance, TOSHIBA recommends the paper types listed below. If you want to use paper other than that we recommend, contact your service technician.

Media type	Product name
Plain paper	TGIS Paper/Neusiedler	80 g/m2
THICK PAPER 1	Colour Copy/Neusiedler	90 g/m2
	Colour Copy/Neusiedler	100 g/m2
THICK PAPER 2	Colour Copy/Neusiedler	120 g/m2
	Colour Copy/Neusiedler	160 g/m2
Tracing paper	75 g/m2 tracing paper
Sticker labels	3478/Zweckform-Avery
Transparencies *1	PP2500/3M

*1 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other than the TOSHIBA-recommended ones are used, this could cause an equipment malfunction.

Paper types not acceptable

Do not use the types of paper listed below since they may cause paper jams.

yDamp paper

yCreased paper

yWrinkled paper or paper prone to be curled

yPaper whose surface is extremely smooth or rough

Do not use the types of paper listed below since they may cause an equipment malfunction.

yPaper whose surface is specially treated

yPaper once printed with other copiers or printers

Storing paper

Observe the following cautions when storing copy paper:

yWrap copy paper in its wrapping paper to prevent it from gathering dust.

yDo not expose copy paper to direct sunlight.

yStore copy paper in a damp-free place.

yStore copy paper on a flat surface to prevent it from being creased or bent.

32 Preparation 2 - Placing Copy Paper

Image 34

Contents Operators Manual for Copying Functions Page Preface PrefaceFor Germany only Working environmentPage Before Reading This Manual Lineup of our manualsHow to read this manual Signal in this manual Description of original/paper directionTrademarks Contents Copying in Same Page Order as Originals Sort Copying 100Cleaning charger 101 Cleaning transfer charger 102 111Contents Cartridge detecting function Toshiba Quality Is Second to NoneRecommended toner cartridges Toner remaining check functionToner Supplies / PartsGeneral Functions extended by various options Features of e-STUDIO166/206Ecological energy-saving design General Precautions When installing or movingOther points 10 cm 80 cmWhen using the equipment Position of Certification label, etc During maintenance or inspection When handling suppliesDisclaimer Notice PorationEnvironmental Information Energy Star programmeDescription of Each Component Preparation 1 Turning Power onPreparation 2 Placing Copy Paper Platen Cover Description of Each ComponentFront / Right side Automatic Document Feeder optional, MR-2017Left side / Inner side Original scale USB terminal 4-pinReceiving tray Scanning area Platen sheetConfiguration of options Control panel LED display Original mode button/lampsDensity adjustment buttons/lamps Copy qty. / zoom display selecting button/lampCopy button/lamps Original setting lampDrawer button/lamps Original button/lampsTurning power on Preparation 1 Turning Power onTurning power OFF To turn the equipment into the energy saving mode manually Saving energy when not in use Energy saving modeCancelling the energy saving mode Acceptable media types Preparation 2 Placing Copy PaperFeeder Media type Paper size Maximum sheet Capacity *1 Storing paper Recommended paperPaper types not acceptable Media type Product namePlacing paper in drawers Press down the paper plateWiden the gap with both hands Adjust the side guides to the desired paper size Place paper in the drawerDo not let your fingers be caught when closing the drawer Register the paper size into the equipmentPreparation 3 Registering Size of Paper Placed Registering standard size A3, A4, A4-R, A5-R, B4Registering other standard sizes Code NoPreparation 3 Registering Size of Paper Placed Press the Start button Placing Originals Using Bypass TrayMaking Copies Placing Originals When the built-in memory has become full during scanningSetting position Type of origi Acceptable originalsPlacing originals on the original glass Placing booklet-type originals such as books or catalogues When black streaks appear on the copied image Using Automatic Document Feeder optionalPrecautions for Automatic Document Feeder optional Media types Maximum size Maximum number Paper weightWhen placing a large amount of originals with a long width Placing originals on Automatic Document Feeder optionalPlace the original Making CopiesCheck if paper is placed in the drawer Select the copy modes as requiredStopping/Resuming copying When the number of sheets exiting has exceededWhen the paper has run out Press the CLEAR/STOP button during scanning or copyingInterrupting copying and making another copy Interrupt copy Press the Interrupt buttonUsing Bypass Tray Media type Paper size Maximum sheet Capacity *1Preparation Registering paper size placed on bypass tray ST-R Folio Comp Using Bypass Tray Press the Start button Bypass copying on standard size paper Placed on the bypass tray is lit Using Bypass Tray Page Zooming In/Out Copy Image Default Settings Paper SelectionAutomatic paper selection APS Manual paper selection Default Settings Contents Default setting at installationPlace the original on the Automatic Document Feeder Paper SelectionAutomatic paper selection APS Automatic paper selection APSManual paper selection Place paper in the drawer Place the originalSelecting the drawer of the equipment Automatic magnification selection AMS Zooming In/Out Copy ImageAutomatic magnification selection AMS Specifying reproduction ratio manuallyIf the Function Clear lamp is blinking and copying stops Specifying both the sizes of the original and the copy paper Desired reproduction ratio appears Specifying reproduction ratio manuallyPress Zooming out or Zooming in button untilZooming In/Out Copy Image Copying in Same Page Order as Originals Sort Copying Selecting Image Mode To return it to the automatic copy density mode Adjusting Density LevelTo adjust the density to the desired level DarkPage Settings and Management of Equipment Switching Operation Sound On/Off All lamps on Sound on All lamps off Sound offChecking Total Number Copied Switch the display to check the rest of the total numberPress Button for more than two seconds Page Troubleshooting When Message Lamp is Lit/Blinking Paper JamsPaper empty lamp When Message Lamp is Lit/BlinkingCover open lamp Toner lampRecommended toner cartridges Service call lamp Paper jam lampPaper Jams When paper jams occur frequentlyChecking position of paper jams Raise the lever, and then open the upper cover When releasing jammed paperPaper jams within Automatic Document Feeder optional Do not tear jammed paperPaper Jams Paper jams on bypass tray Pull out the paper jammed on the bypass trayPaper jam behind transfer unit Paper jams within fuser unit Close the transfer unit and the side coverPaper Jams Paper jams within Paper Feed Unit optional Open the front cover Replacing Toner CartridgeHold down the green lever Pull out the toner cartridge Clean the charger Replacing Toner Cartridge With the transfer charger wire General operation Before Calling Service TechnicianPhenomenon Usual cause Countermeasure Toner-related items Original/Copy paper-related itemsImage trouble Tion Charger is dirty Clean the charger Page Maintenance and Inspection Daily Inspection 100Daily Inspection Original glass Guides Platen sheetCleaning charger Open the front cover Clean the chargerCleaning transfer charger Daily Inspection Page Specifications and Options STUDIO166/206 Specifications OPCContinuous copying speed Paper size Feeder STUDIO166 STUDIO206Automatic Document Feeder Specifications of OptionsPaper Feed Unit Packing List Page Index 106 DP-1660/2060 OME06015700 Multifunctional Digital Systems