About Lamp
Lamp replacement
Alamp is consumable supplies. If used for extended periods, images will appear dark, and the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime of the lamp depends on condi- tion of use.) If this happens, replace it with a new one.
CAUTION
If you have been using the projector, the lamp will be very hot, and may cause burn injuries.
Wait for the lamp to cool (for longer than 1 hour) before replacing it.
If the lamp should break, please handle with care to avoid injury due to broken pieces and contact your dealer for repair service.
Lens cleaning
•Clean the lens with a commercially available blower and/or lens cleaner.
•The lens is easily scratched, so do not rub it with hard objects, or strike it.
Main unit cleaning
•Clean the main unit after unplugging the power cord.
•Wipe dirt off the main unit gently with a soft cloth.
•Do not wipe the main unit with a damp cloth. Doing so may allow water to get inside, result- ing in an electric shock or failure.
•Do not use benzene, thinner and the like as they may deform or discolor the unit or dam- age the paint surface.
•When using a chemically treated cloth, follow the precautions included with the cloth.
43