Toshiba TDP-S9 owner manual Names of each part on the control panel and remote control

Page 16

Names of each part on the control panel and remote control

Control panel

3
5	4
6	7
2	1

Remote Control

	Remote Control
	transmitter
1
3
2
8
9	4
9
10	13
5	12
5
	11

Name	: Main Function
I/ ON/STANDBY button: Turns the power on/off (standby). p.21
MENU/Menu button	: Displays menus. p.27
Selection button	: Menu selections and adjustments,etc. p.28
AUTO/Auto button	: Automatically adjusts frequency and phase. p.26

SOURCE/Source button : Manually selects an input source. p.25

LAMP indicator			: Displays lamp mode. p.22
ON indicator			: Lights when internal temperature too high. p.37
Enter button			: Confirms the selection.
Keystone	/	button	: Adjusts image distortion caused by tilting the projector. p.25
Volume	/	button	: Press the Volume	button to increase the volume.
			Press the Volume	button to reduce the volume. p.33
Mute button			: Cuts off the sound temporarily. p.26
Blank button			: Cuts off the screen temporarily. p.26
4:3/16:9 button			: Press the 4:3/16:9 button to switch the image aspect ratio
			from 4:3 to 16:9. p.26

Note

•For the remainder of this manual, buttons are referred to as follows: Selection buttons ⇒

16

Image 16

Contents TDP-S9 Svga Safety Precautions USA onlyBefore Using Important Safety Instructions Source of LightHeat Important Safety Instructions Lightning stormsAccessories Replacement Parts Power Supply Cord Selection Important PrecautionsPlace and Manner of Installation Save Original Packing MaterialsImportant Precautions Avoid Volatile Liquid Exemption ClausesRemote Control Battery Other Cautions and InformationsContents Maintenance OthersChecking the package contents Names of each part on the main unit PreparationsNames of each part on the control panel and remote control Parts on the rear panel Loading a Lithium battery into the remote control Preparing and using the remote controlOperating the remote Control Placement Styles PlacementProjection Distance and Size Connection Before connectionTurning the power on and off Connecting the power cordTurning the power on Removing the lens coverTurning the power off Press the I/ ON/STANDBY button againTurn on the power Basic operationsSelect the language Activate the connected deviceAdjusting the screen size and focus Projector placement angle adjustmentsTo adjust the horizontal angle, use the tilt adjuster Manually selects an input source Source Using handy featuresCorrecting the keystone distortion Keystone Automatically adjusts frequency and phase Auto Switching the image aspect ratio 43/169Press the remote controls Mute button Cutting off the sound temporarily MuteUsing the menus How to use the menusUsing the menu Image menuVideo menu SaturationTint SharpnessPhase Display menuTracking PositionLanguage menu LanguageUsing the menu Advanced menuAudio menu VolumeMute Lamp replacement Immediately replace the lamp when Lamp LED lights amberWhen the lamp is broken About lampUnplug power cord Wait until lamp is sufficiently cooled Lamp Hours ResetRemove the lamp cover Pull out the lampLens and main unit cleaning Lamp replacementLens cleaning Main unit cleaningStatus display BrightnessBefore calling service personnel List of general specifications SpecificationsSpecification List of supported signals RGB signals Specifications List of supported signals Hdtv signalsList of supported signals Video, S-Video signals Pin assignment of Computer in terminalsPin assignment of S-Video terminal Separately Sold Product