Toshiba TDP-S9 owner manual Using handy features, Manually selects an input source Source

Page 25

When the foot adjuster

Using handy features
■ Manually selects an input source (Source)	Remote
	Remote
If you are connecting multiple sources to the projector	Control panel Control
simultaneously, press the control panel’s SOURCE button
or the remote control’s Source button. The projector will
detect your source.

Note

•The image may not be projected or auto adjustment/setting may not be performed correctly for input signals other than those supported by the projector p.40 , p.41 .

■Correcting the keystone distortion (Keystone)

p.24 is used to change the projector placement angle while projecting the image, the picture will undergo keystone (trapezoidal) distortion. This projector is capable of correcting this keystone distortion.

Before correction After correction

Use the control panel's buttons or the remote control's Keystone Keystone buttons for keystone adjustment.

Notes

•Keystone adjustment is available for the keystone distortion in a slant angle of ±15 degrees.

•Keystone adjustment will not change the shape of the menus, the start-up screen, and the background (with no signal input).

Operations

25

Image 25

Contents TDP-S9 Svga USA only Safety PrecautionsBefore Using Source of Light Important Safety InstructionsHeat Lightning storms Important Safety InstructionsAccessories Replacement Parts Important Precautions Power Supply Cord SelectionPlace and Manner of Installation Save Original Packing MaterialsExemption Clauses Important Precautions Avoid Volatile LiquidOther Cautions and Informations Remote Control BatteryContents Others MaintenanceChecking the package contents Preparations Names of each part on the main unitNames of each part on the control panel and remote control Parts on the rear panel Loading a Lithium battery into the remote control Preparing and using the remote controlOperating the remote Control Placement Styles PlacementProjection Distance and Size Before connection ConnectionConnecting the power cord Turning the power on and offTurning the power on Removing the lens coverPress the I/ ON/STANDBY button again Turning the power offBasic operations Turn on the powerSelect the language Activate the connected deviceAdjusting the screen size and focus Projector placement angle adjustmentsTo adjust the horizontal angle, use the tilt adjuster Manually selects an input source Source Using handy featuresCorrecting the keystone distortion Keystone Switching the image aspect ratio 43/169 Automatically adjusts frequency and phase AutoPress the remote controls Mute button Cutting off the sound temporarily MuteHow to use the menus Using the menusImage menu Using the menuSaturation Video menuTint SharpnessDisplay menu PhaseTracking PositionLanguage Language menuAdvanced menu Using the menuAudio menu VolumeMute Immediately replace the lamp when Lamp LED lights amber Lamp replacementWhen the lamp is broken About lampLamp Hours Reset Unplug power cord Wait until lamp is sufficiently cooledRemove the lamp cover Pull out the lampLamp replacement Lens and main unit cleaningLens cleaning Main unit cleaningBrightness Status displayBefore calling service personnel List of general specifications SpecificationsSpecification List of supported signals RGB signals List of supported signals Hdtv signals SpecificationsList of supported signals Video, S-Video signals Pin assignment of Computer in terminalsSeparately Sold Product Pin assignment of S-Video terminal