Toshiba TDP-S9 owner manual Using the menu, Image menu

Page 28

Using the menu (Continued)

■Image menu

Use this menu to adjust image-related items.

Item	Description
Contrast	Adjust the image contrast.
	Lower	Higher
Brightness	Adjust the brightness of the image.
	Darker	Brighter
Keystone	Adjusts image distortion caused by tilting the projector.
	Reduce the upper width		Reduce the lower width
Aspect Ratio	Selects this function to fit 16:9, 4:3 aspect ratio. If the input signal is a
	computer signal greater than SVGA or component 1080i / 720p, 16:9
	or 4:3 aspect ratio will be available.
	16:9	4:3
Blank Screen	Blanks the screen temporarily, and selects the screen color when
	Blank Screen is active.
	Switch with	and .
	White/Black/Blue/Gray/Red/Green/Yellow/Cyan/Magenta
White Peaking	White peaking can be adjusted between 0 and 10.
	Switch with	and .
	Setting 10 will maximize the brightness.
	Setting 0 will maximize color reproduction quality.
Red	Manually adjusts red.
	Less red	More red
Green	Manually adjusts green.
	Less green	More green
Blue	Manually adjusts blue.
	Less blue	More blue

28

Image 28

Contents TDP-S9 Svga Safety Precautions USA onlyBefore Using Important Safety Instructions Source of LightHeat Important Safety Instructions Lightning stormsAccessories Replacement Parts Power Supply Cord Selection Important PrecautionsPlace and Manner of Installation Save Original Packing MaterialsImportant Precautions Avoid Volatile Liquid Exemption ClausesRemote Control Battery Other Cautions and InformationsContents Maintenance OthersChecking the package contents Names of each part on the main unit PreparationsNames of each part on the control panel and remote control Parts on the rear panel Loading a Lithium battery into the remote control Preparing and using the remote controlOperating the remote Control Placement Styles PlacementProjection Distance and Size Connection Before connectionTurning the power on and off Connecting the power cordTurning the power on Removing the lens coverTurning the power off Press the I/ ON/STANDBY button againTurn on the power Basic operationsSelect the language Activate the connected deviceAdjusting the screen size and focus Projector placement angle adjustmentsTo adjust the horizontal angle, use the tilt adjuster Manually selects an input source Source Using handy featuresCorrecting the keystone distortion Keystone Automatically adjusts frequency and phase Auto Switching the image aspect ratio 43/169Press the remote controls Mute button Cutting off the sound temporarily MuteUsing the menus How to use the menusUsing the menu Image menuVideo menu SaturationTint SharpnessPhase Display menuTracking PositionLanguage menu LanguageUsing the menu Advanced menuAudio menu VolumeMute Lamp replacement Immediately replace the lamp when Lamp LED lights amberWhen the lamp is broken About lampUnplug power cord Wait until lamp is sufficiently cooled Lamp Hours ResetRemove the lamp cover Pull out the lampLens and main unit cleaning Lamp replacementLens cleaning Main unit cleaningStatus display BrightnessBefore calling service personnel List of general specifications SpecificationsSpecification List of supported signals RGB signals Specifications List of supported signals Hdtv signalsList of supported signals Video, S-Video signals Pin assignment of Computer in terminalsPin assignment of S-Video terminal Separately Sold Product