Toshiba TDP-S9 owner manual Specifications, List of general specifications

Page 39

Specifications

■List of general specifications

		Item	Specification

	Consumption Power		250 W
	Weight		2.4 kg
	External Dimensions		256 x 102 x 200 mm (W x H x D)
	(including protruding parts)
	Cabinet material*		PC+ABS resin and ABS resin
	Conditions for usage environment		Temp: 5°C to 35°C; relative humidity: 35% to 85%
	Display pixels		1 chip DMD™
	Picture elements		480, 000 pixels (800 x 600)
	Lens		Zoom lens F=2.5 f=20.2-24.2 mm
	Lamp		High-pressure mercury lamp
	Projection screen size		27.5-275 inches
	Projection distance		1.2-10.00m
	Speaker		2W x 1
	terminal	COMPUTER IN terminal	Mini D sub 15 pin RGB / Y/PB/PR (dual use)
	terminal	S-VIDEO terminal	Mini DIN 4 pin
	Connection	S-VIDEO terminal	Mini DIN 4 pin
		VIDEO terminal	RCA Pin Jack, 1 V (p-p), 75 Ω
		AUDIO terminal	ø3.5mm dia. stereo mini-jack, 1.5V (rms); 22 kΩ or more

*Each plastic part displays the materials it is made from, in order to facilitate recycling after this product becomes no longer usable.

Note

• Design, specifications, etc. subject to change without notice for improvements, etc.

Others

39

Image 39

Contents TDP-S9 Svga USA only Safety PrecautionsBefore Using Source of Light Important Safety InstructionsHeat Lightning storms Important Safety InstructionsAccessories Replacement Parts Save Original Packing Materials Power Supply Cord SelectionImportant Precautions Place and Manner of InstallationExemption Clauses Important Precautions Avoid Volatile LiquidOther Cautions and Informations Remote Control BatteryContents Others MaintenanceChecking the package contents Preparations Names of each part on the main unitNames of each part on the control panel and remote control Parts on the rear panel Preparing and using the remote control Loading a Lithium battery into the remote controlOperating the remote Control Placement Placement StylesProjection Distance and Size Before connection ConnectionRemoving the lens cover Turning the power on and offConnecting the power cord Turning the power onPress the I/ ON/STANDBY button again Turning the power offActivate the connected device Turn on the powerBasic operations Select the languageProjector placement angle adjustments Adjusting the screen size and focusTo adjust the horizontal angle, use the tilt adjuster Using handy features Manually selects an input source SourceCorrecting the keystone distortion Keystone Cutting off the sound temporarily Mute Automatically adjusts frequency and phase AutoSwitching the image aspect ratio 43/169 Press the remote controls Mute buttonHow to use the menus Using the menusImage menu Using the menuSharpness Video menuSaturation TintPosition PhaseDisplay menu TrackingLanguage Language menuAdvanced menu Using the menuVolume Audio menuMute About lamp Lamp replacementImmediately replace the lamp when Lamp LED lights amber When the lamp is brokenPull out the lamp Unplug power cord Wait until lamp is sufficiently cooledLamp Hours Reset Remove the lamp coverMain unit cleaning Lens and main unit cleaningLamp replacement Lens cleaningBrightness Status displayBefore calling service personnel Specifications List of general specificationsSpecification List of supported signals RGB signals Pin assignment of Computer in terminals SpecificationsList of supported signals Hdtv signals List of supported signals Video, S-Video signalsSeparately Sold Product Pin assignment of S-Video terminal