Toshiba TDP-S9 Lens and main unit cleaning, Lamp replacement, Lens cleaning, Main unit cleaning

Page 36

Lamp replacement (Continued)

Used Lamps

This projector’s lamps contain trace amounts of environmentally harmful inorganic mercury. Be careful not to break used lamps, and dispose of them in accordance with local regulations.

Lens and main unit cleaning

WARNING

•Request cleaning and maintenance of a ceiling-mounted unit from your projector dealership. Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus resulting in injury.

■Lens cleaning

• Clean the lens with a commercially available blower and/or lens cleaner.

• The lens is easily scratched, so do not rub it with hard objects, or strike it.

■ Main unit cleaning

•Clean the main unit after unplugging the power cord.

•Wipe dirt off the main unit gently with a soft cloth.

• If the soiling is severe, dip the cloth in a neutral detergent diluted in water, wring well, and gently wipe off the dirt, then finish up by wiping with a dry cloth.

36

Image 36

Contents TDP-S9 Svga Safety Precautions USA onlyBefore Using Important Safety Instructions Source of LightHeat Important Safety Instructions Lightning stormsAccessories Replacement Parts Power Supply Cord Selection Important PrecautionsPlace and Manner of Installation Save Original Packing MaterialsImportant Precautions Avoid Volatile Liquid Exemption ClausesRemote Control Battery Other Cautions and InformationsContents Maintenance OthersChecking the package contents Names of each part on the main unit PreparationsNames of each part on the control panel and remote control Parts on the rear panel Preparing and using the remote control Loading a Lithium battery into the remote controlOperating the remote Control Placement Placement StylesProjection Distance and Size Connection Before connectionTurning the power on and off Connecting the power cordTurning the power on Removing the lens coverTurning the power off Press the I/ ON/STANDBY button againTurn on the power Basic operationsSelect the language Activate the connected deviceProjector placement angle adjustments Adjusting the screen size and focusTo adjust the horizontal angle, use the tilt adjuster Using handy features Manually selects an input source SourceCorrecting the keystone distortion Keystone Automatically adjusts frequency and phase Auto Switching the image aspect ratio 43/169Press the remote controls Mute button Cutting off the sound temporarily MuteUsing the menus How to use the menusUsing the menu Image menuVideo menu SaturationTint SharpnessPhase Display menuTracking PositionLanguage menu LanguageUsing the menu Advanced menuVolume Audio menuMute Lamp replacement Immediately replace the lamp when Lamp LED lights amberWhen the lamp is broken About lampUnplug power cord Wait until lamp is sufficiently cooled Lamp Hours ResetRemove the lamp cover Pull out the lampLens and main unit cleaning Lamp replacementLens cleaning Main unit cleaningStatus display BrightnessBefore calling service personnel Specifications List of general specificationsSpecification List of supported signals RGB signals Specifications List of supported signals Hdtv signalsList of supported signals Video, S-Video signals Pin assignment of Computer in terminalsPin assignment of S-Video terminal Separately Sold Product