Toshiba TDP-S9 owner manual Status display, Brightness

Page 37

Status display

The indicator informs you of projector state.

The projector is powered and ready.

(Green) Flashing

The projector system has some problems with its fan, so the projector cannot start up.

(Green)

Flashing(Amber)

The projector is in good condition on working.

(Green) (Green)

 

 

The lamp is in good condition and is projecting at maximum

 

 

brightness.

(Green)

(Green)

 

 

 

The lamp has reached its end of life and must be changed soon.

 

 

The lamp will continue to operate until it fails. Change the lamp. If

(Amber)

(Green)

the lamp is off, then the ballast will become malfunction.

 

 

The projector is shutting down. The fan motor is cooling the lamp

 

 

for shutdown. Do not unplug the power cable or turn the power

(Green)

(Green)

switch off before the lamp LED turns off. The fan motor

Flashing

 

 

Temperature is too high. The lamp will turn off.

(Amber)

Flashing(Green)

PRECAUTION

• Make sure to unplug the power cord if something goes wrong.

Others

37

Image 37
Contents TDP-S9 Svga USA only Safety PrecautionsBefore Using Source of Light Important Safety InstructionsHeat Lightning storms Important Safety InstructionsAccessories Replacement Parts Important Precautions Power Supply Cord SelectionPlace and Manner of Installation Save Original Packing MaterialsExemption Clauses Important Precautions Avoid Volatile LiquidOther Cautions and Informations Remote Control BatteryContents Others MaintenanceChecking the package contents Preparations Names of each part on the main unitNames of each part on the control panel and remote control Parts on the rear panel Loading a Lithium battery into the remote control Preparing and using the remote controlOperating the remote Control Placement Styles PlacementProjection Distance and Size Before connection ConnectionConnecting the power cord Turning the power on and offTurning the power on Removing the lens coverPress the I/ ON/STANDBY button again Turning the power offBasic operations Turn on the powerSelect the language Activate the connected deviceAdjusting the screen size and focus Projector placement angle adjustmentsTo adjust the horizontal angle, use the tilt adjuster Manually selects an input source Source Using handy featuresCorrecting the keystone distortion Keystone Switching the image aspect ratio 43/169 Automatically adjusts frequency and phase AutoPress the remote controls Mute button Cutting off the sound temporarily MuteHow to use the menus Using the menusImage menu Using the menuSaturation Video menuTint SharpnessDisplay menu PhaseTracking PositionLanguage Language menuAdvanced menu Using the menuAudio menu VolumeMute Immediately replace the lamp when Lamp LED lights amber Lamp replacementWhen the lamp is broken About lampLamp Hours Reset Unplug power cord Wait until lamp is sufficiently cooledRemove the lamp cover Pull out the lampLamp replacement Lens and main unit cleaningLens cleaning Main unit cleaningBrightness Status displayBefore calling service personnel List of general specifications SpecificationsSpecification List of supported signals RGB signals List of supported signals Hdtv signals SpecificationsList of supported signals Video, S-Video signals Pin assignment of Computer in terminalsSeparately Sold Product Pin assignment of S-Video terminal