Toshiba DEV002Z instruction manual

Page 3

E6581295

General Operation

 

Danger

 

Never disassemble, modify or repair.

Disassembly

Doing so could result in electric shock, fire and injury. For repairs, call your sales

prohibited

agency.

Do not attach this option to any inverter other than the VF-AS1/PS1.

Prohibited

Doing so could result in electric shock or fire.

 

When the inverter is energized, never detach the this option from the VF-AS1/PS1. Doing so could result in electric shock.

Don't place or insert any kind of object into the DEV002Z (electrical wire cuttings, rods, wires).

Doing so could result in electric shock or fire.

Do not allow water or any other fluid to come in contact with the DEV002Z. Doing so could result in electric shock or fire.

 

Turn off the VF-AS1/PS1 when installing and wiring this option.

Mandatory

If the inverter begins to emit smoke or an unusual odor, or unusual sounds, immediately

turn power off.

 

 

If the equipment is continued in operation in such a state, the result may be fire. Call

 

your local sales agency for repairs.

Transportation & installation

Danger

Do not operate the inverter if it is damaged or any component is missing.

Prohibited

Doing so could result in electric shock or fire. Call your local sales agency for repairs.

 

Do not place any inflammable substances near the VF-AS1/PS1 Inverter. If an accident occurs in which flame is emitted, this could lead to fire.

Do not install in any location where the inverter could come into contact with water or other fluids.

Doing so could result in electric shock or fire.

When installing this option, be careful not to touch the leads from parts on the reverse side of its circuit board.

Doing so could result in injury.

 

Operate under the environmental conditions prescribed in the instruction manual.

Mandatory

Operations under any other conditions may result in malfunction.

 

- 2 -

Image 3
Contents Tosvert VF-AS1/PS1 Safety precautions Page Page Introduction Contents VF-AS1/PS1 DEV002Z OverviewVF-AS1/PS1 DEV002ZCanl Exterior featuresDeviceNet connector CanhLED DeviceNet indicatorInstalling the DEV002Z Installation method Connecting to the networkNetwork Grounding MAC ID Setting a MAC ID number and a network baud rateCommunications-related parameters F852 Preset speed operation selection F851 Communication Loss Action Setting Network breaksST/RUN ST/ RUN F830 Assembly Object SettingAlarm ReadyOFF E6581295⑥ Data composition of output instanceST=ON ST=ON ST=OFFVF-AS1/PS1 RR/S4 CCA SW1 Source Sink DeviceNet Local/Remote OperationWarranty Specifications