Toshiba DEV002Z instruction manual Exterior features, DeviceNet connector, Canh, Canl

E6581295⑥

2. Exterior features

The external view of this option and the name of each part are shown below:

DeviceNet indicator (Refer to Section 2.2)

Panel mounting tabs

(Refer to Section 3)

Dip switch

(Refer to Section 4.3)

DeviceNet connector

(Refer to Section 2.1)

Danger

Prohibited

▼Do not change the switch setting when the power is on.

It could lead to electric shocks, or the option might breaks down or get damaged.

2.1. DeviceNet connector

Used to connect DeviceNet network cables. The terminal is a plug-type and the signal of each terminal is as follows.

Color	Symbol	Signal classification:
Red	V+	Network Power Supply (V+)
White	CAN_H	Communication signal (High)
Silver	SHIELD	Shield
Blue	CAN_L	Communication signal (Low)
Black	V-	Network Power Supply (V-)

Size of connectable wire: 0.3 to 1.5mm2 (AWG 22 to 16), Strip-off length: 7mm

Tightening torque: 0.5 to 0.6 N·m

Recommended screwdriver: Small flat-blade screwdriver (blade thickness: 0.6mm, blade width: 3.5mm or less)

- 7 -