Toshiba DEV002Z instruction manual DeviceNet indicator, Led

Page 9

E6581295

2.2. DeviceNet indicator

The DEV002Z option has a two-color (red and green) LED as a means of indicating the MNS (module/network status), which works basically in accordance with DeviceNet specifications.

LED

Status

Item displayed

 

 

Device is not on-line.

Off

Not Powered/Not On–line

- The DEV002Z has not completed the Dup_MAC_ID test yet.

 

 

- The DEV002Z may not be powered.

Lights

Device Operational AND

The DEV002Z is operating in a normal condition and the DEV002Z

green.

On–line, Connected

is on-line with connections in the established state.

 

Device Operational AND

The DEV002Z is operating in a normal condition and the DEV002Z

Flashes

On–line, Not Connected

is on-line with no connections in the established state.

or

- The DEV002Z has passed the Dup_MAC_ID test, is on-line, but

green.

Device On–line AND

has no established connections to other nodes.

 

 

Device needs commissioning

- Configuration missing, incomplete or incorrect.

Flashes

Minor Fault and/or

Recoverable fault and/or one or more I/O Connections are in the

red.

Connection Time–Out

Timed-Out state.

 

 

The DEV002Z has an unrecoverable fault; may need replacing.

Lights red.

Critical Fault or

Failed communication device. The DEV002Z has detected an error

Critical Link Failure

that has rendered it incapable of communicating on the network

 

 

 

(Duplicate MAC ID, or Bus-off).

Flashes

 

A specific Communication Faulted device. The DEV002Z has

Communication Faulted and

detected a Network Access error and is in the Communication

red and

Received an Identify Comm

Faulted state.

green

Fault Request - Long Protocol

The DEV002Z has subsequently received and accepted an Identify

alternately.

 

Communication Faulted Request - Long Protocol message.

 

 

- 8 -

Image 9
Contents Tosvert VF-AS1/PS1 Safety precautions Page Page Introduction Contents VF-AS1/PS1 OverviewDEV002Z VF-AS1/PS1 DEV002ZDeviceNet connector Exterior featuresCanh CanlLED DeviceNet indicatorInstalling the DEV002Z Installation method Connecting to the networkNetwork Grounding MAC ID Setting a MAC ID number and a network baud rateCommunications-related parameters F852 Preset speed operation selection F851 Communication Loss Action Setting Network breaksAlarm F830 Assembly Object SettingReady ST/RUN ST/ RUNOFF E6581295⑥ Data composition of output instanceST=ON ST=ON ST=OFFVF-AS1/PS1 RR/S4 CCA SW1 Source Sink DeviceNet Local/Remote OperationWarranty Specifications