Toshiba B-852 owner manual 100BASE LAN is being initialised, Dhcp Client is being initialised

APPENDIX 1 MESSAGES AND LEDS ENGLISH VERSION EO1-33055

APPENDIX 1 MESSAGES AND LEDS

		LED Indication				Restoration	Acceptance of
No.	LCD Message				Printer Status	by RESTART	Status Request
		POWER	ONLINE	ERROR		key Yes/No	Reset Command
							Yes/No
					When the following abnormal	No	No
					operations are performed, a system error
					occurs:
					(a) Command fetch from an odd address
					(b) Access to word data at an odd
					address
					(c) Access to long-word data at an odd
19					address
	SYSTEM ERROR		z		(d) Access to the area of 80000000H to
					FFFFFFFFH in the logic space in
					user mode.
					(e) An undefined instruction in an area
					other than a delay slot was decoded.
					(f) An undefined instruction in a delay
					slot was decoded.
					(g) An instruction to rewrite a delay slot
					was decoded.
20	LAN INITIAL...		z	z	100BASE LAN is being initialised.	-----	-----
21	DHCP INITIAL...		z	z	DHCP CLIENT is being initialised.	-----	-----
22	LOW BATTERY		z		The voltage of the Real Time Clock	No	Yes
					Battery is 1.9V or less
23	Display of error		z		A command error has occurred in	Yes	Yes
	message (See Notes.)				analyzing the command.

NOTE: When an error message listed above appears on the LCD message display, please refer to Section 5 TROUBLESHOOTING for solution.

EA1- 2