Toshiba B-443 owner manual Self Test

Page 26

EO1-33013

3.7 Self Test

To initiate the self test mode, depress the FEED button while turning on the printer power. The printer will calibrate the label length. If the label gap is not detected within 7", the printer stops feeding labels and the media is treated as continuous paper. In self test, a check pattern is used to check the performance of the thermal print head. Following the check pattern, the printer prints internal settings as listed below:

1.Printer model and firmware version

2.Mileage

3.Flash times

4.Check sum

5.Serial port setting

6.Code page setting

7.Country code setting

8.Print speed setting

9.Print density setting

10.Label size setting

11.Gap (Bline) width and offset setting

12.Backing paper transparence

13.File list

14.Memory available

When the self test is completed, the printer enters the dump mode. Please turn the printer's power off and then on to resume normal printing.

19

Image 26

Contents 443 List of Standards of Conformity EO1-33013 Contents Options Supplies Label Stock Ribbon Safety Summary Meanings of Each SymbolPrecautions Product Introduction CompliancesUnpacking and Inspection Equipment ChecklistApplicable Model EO1-33013 Printer Parts Top front viewInterior view Rear view External Label Roll Mount External label roll mountButtons and Indicators Setting Up the Printer Loading Label and Tag StockInserting label supply roll into label roll mount Feed labels through adjustable label guide Setting up printer for self-peeling function Self-Peeling FunctionPrinter ready for self-peeling function Ribbon Loading Instructions Placement of ribbon supply roll Installation of label stock and thermal transfer ribbon Install External Label Roll Mount Installation of external label roll mountInstall Memory Module Installation of memory module OptionSelf Test Dump Mode Gap Sensor Calibration Utility Power-on UtilitiesSelf Test Utility Parameter Default Value Cleared by Initialization Printer InitializationError Messages Troubleshooting Guide Problem SolutionPower Requirements SpecificationsIndicators and Buttons PrinterPrinter Body OptionsEnvironment Ribbon SuppliesLabel Stock