Toshiba B-443 owner manual Buttons and Indicators

Page 15

EO1-33013

2.6 Buttons and Indicators

PWR. (POWER) Indicator

The green PWR. indicator illuminates when the POWER switch is turned on.

ON-LINE Indicator

The green ON-LINEindicator illuminates when the printer is ready to print. When PAUSE button is pressed, the ON-LINEindicator flashes.

ERR. Indicator (Error/Paper Empty)

The red ERR. indicator illuminates in the event of a printer error, such as memory error, syntax error, and so forth. For a full list of error messages, please refer to section 4.2, Error Messages.

PAUSE Button

The PAUSE button allows the user to stop a print job and then continue the printing with a second depression of the button. By pressing the PAUSE button:

(1) the printer stops printing after the printing label, (2) the PAUSE LED flashes, and (3) the printer will hold all data in memory. This allows for trouble-free replacement of label stock and thermal transfer ribbon. A second depression of the PAUSE button will restart the printer.

Note: If the PAUSE button is held down for more than 3 seconds, the printer will be reset and all data of the previous printing job will be lost.

FEED Button

Press the FEED button to feed the label to the beginning of the next label.

8

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 443 List of Standards of Conformity EO1-33013 Contents Options Supplies Label Stock Ribbon Meanings of Each Symbol Safety SummaryPrecautions Compliances Product IntroductionEquipment Checklist Applicable ModelUnpacking and Inspection EO1-33013 Top front view Printer PartsInterior view Rear view External label roll mount External Label Roll MountButtons and Indicators Loading Label and Tag Stock Setting Up the PrinterInserting label supply roll into label roll mount Feed labels through adjustable label guide Self-Peeling Function Setting up printer for self-peeling functionPrinter ready for self-peeling function Ribbon Loading Instructions Placement of ribbon supply roll Installation of label stock and thermal transfer ribbon Installation of external label roll mount Install External Label Roll MountInstallation of memory module Option Install Memory ModuleSelf Test Dump Mode Power-on Utilities Self Test UtilityGap Sensor Calibration Utility Printer Initialization Parameter Default Value Cleared by InitializationError Messages Problem Solution Troubleshooting GuidePrinter SpecificationsIndicators and Buttons Power RequirementsOptions EnvironmentPrinter Body Supplies Label StockRibbon
Top Page Image Contents